ES 客户端

Signed-off-by: 萌森 <qyg2297248353@163.com>
2026-06-16 01:02:14 +08:00 · 2024-07-22 17:20:08 +08:00
parent 46b46f26d5
commit 4754aefbfa
18 changed files with 631 additions and 0 deletions
@@ -0,0 +1,183 @@
+# For more configuration options see the configuration guide for Kibana in
+# https://www.elastic.co/guide/index.html
+
+# =================== System: Kibana Server ===================
+# Kibana is served by a back end server. This setting specifies the port to use.
+server.port: 5601
+
+# Specifies the address to which the Kibana server will bind. IP addresses and host names are both valid values.
+# The default is 'localhost', which usually means remote machines will not be able to connect.
+# To allow connections from remote users, set this parameter to a non-loopback address.
+server.host: "0.0.0.0"
+
+# Enables you to specify a path to mount Kibana at if you are running behind a proxy.
+# Use the `server.rewriteBasePath` setting to tell Kibana if it should remove the basePath
+# from requests it receives, and to prevent a deprecation warning at startup.
+# This setting cannot end in a slash.
+#server.basePath: ""
+
+# Specifies whether Kibana should rewrite requests that are prefixed with
+# `server.basePath` or require that they are rewritten by your reverse proxy.
+# Defaults to `false`.
+#server.rewriteBasePath: false
+
+# Specifies the public URL at which Kibana is available for end users. If
+# `server.basePath` is configured this URL should end with the same basePath.
+#server.publicBaseUrl: ""
+
+# The maximum payload size in bytes for incoming server requests.
+#server.maxPayload: 1048576
+
+# The Kibana server's name. This is used for display purposes.
+server.name: "kibana-node"
+
+# =================== System: Kibana Server (Optional) ===================
+# Enables SSL and paths to the PEM-format SSL certificate and SSL key files, respectively.
+# These settings enable SSL for outgoing requests from the Kibana server to the browser.
+#server.ssl.enabled: false
+#server.ssl.certificate: /path/to/your/server.crt
+#server.ssl.key: /path/to/your/server.key
+
+# =================== System: Elasticsearch ===================
+# The URLs of the Elasticsearch instances to use for all your queries.
+#elasticsearch.hosts: ["http://localhost:9200"]
+
+# If your Elasticsearch is protected with basic authentication, these settings provide
+# the username and password that the Kibana server uses to perform maintenance on the Kibana
+# index at startup. Your Kibana users still need to authenticate with Elasticsearch, which
+# is proxied through the Kibana server.
+#elasticsearch.username: "kibana_system"
+#elasticsearch.password: "pass"
+
+# Kibana can also authenticate to Elasticsearch via "service account tokens".
+# Service account tokens are Bearer style tokens that replace the traditional username/password based configuration.
+# Use this token instead of a username/password.
+# elasticsearch.serviceAccountToken: "my_token"
+
+# Time in milliseconds to wait for Elasticsearch to respond to pings. Defaults to the value of
+# the elasticsearch.requestTimeout setting.
+#elasticsearch.pingTimeout: 1500
+
+# Time in milliseconds to wait for responses from the back end or Elasticsearch. This value
+# must be a positive integer.
+#elasticsearch.requestTimeout: 30000
+
+# The maximum number of sockets that can be used for communications with elasticsearch.
+# Defaults to `Infinity`.
+#elasticsearch.maxSockets: 1024
+
+# Specifies whether Kibana should use compression for communications with elasticsearch
+# Defaults to `false`.
+#elasticsearch.compression: false
+
+# List of Kibana client-side headers to send to Elasticsearch. To send *no* client-side
+# headers, set this value to [] (an empty list).
+#elasticsearch.requestHeadersWhitelist: [ authorization ]
+
+# Header names and values that are sent to Elasticsearch. Any custom headers cannot be overwritten
+# by client-side headers, regardless of the elasticsearch.requestHeadersWhitelist configuration.
+#elasticsearch.customHeaders: {}
+
+# Time in milliseconds for Elasticsearch to wait for responses from shards. Set to 0 to disable.
+#elasticsearch.shardTimeout: 30000
+
+# =================== System: Elasticsearch (Optional) ===================
+# These files are used to verify the identity of Kibana to Elasticsearch and are required when
+# xpack.security.http.ssl.client_authentication in Elasticsearch is set to required.
+#elasticsearch.ssl.certificate: /path/to/your/client.crt
+#elasticsearch.ssl.key: /path/to/your/client.key
+
+# Enables you to specify a path to the PEM file for the certificate
+# authority for your Elasticsearch instance.
+#elasticsearch.ssl.certificateAuthorities: [ "/path/to/your/CA.pem" ]
+
+# To disregard the validity of SSL certificates, change this setting's value to 'none'.
+#elasticsearch.ssl.verificationMode: full
+
+# =================== System: Logging ===================
+# Set the value of this setting to off to suppress all logging output, or to debug to log everything. Defaults to 'info'
+#logging.root.level: debug
+
+# Enables you to specify a file where Kibana stores log output.
+#logging.appenders.default:
+#  type: file
+#  fileName: /var/logs/kibana.log
+#  layout:
+#    type: json
+
+# Example with size based log rotation
+#logging.appenders.default:
+#  type: rolling-file
+#  fileName: /var/logs/kibana.log
+#  policy:
+#    type: size-limit
+#    size: 256mb
+#  strategy:
+#    type: numeric
+#    max: 10
+#  layout:
+#    type: json
+
+# Logs queries sent to Elasticsearch.
+#logging.loggers:
+#  - name: elasticsearch.query
+#    level: debug
+
+# Logs http responses.
+#logging.loggers:
+#  - name: http.server.response
+#    level: debug
+
+# Logs system usage information.
+#logging.loggers:
+#  - name: metrics.ops
+#    level: debug
+
+# Enables debug logging on the browser (dev console)
+#logging.browser.root:
+#  level: debug
+
+# =================== System: Other ===================
+# The path where Kibana stores persistent data not saved in Elasticsearch. Defaults to data
+#path.data: data
+
+# Specifies the path where Kibana creates the process ID file.
+#pid.file: /run/kibana/kibana.pid
+
+# Set the interval in milliseconds to sample system and process performance
+# metrics. Minimum is 100ms. Defaults to 5000ms.
+#ops.interval: 5000
+
+# Specifies locale to be used for all localizable strings, dates and number formats.
+# Supported languages are the following: English (default) "en", Chinese "zh-CN", Japanese "ja-JP", French "fr-FR".
+i18n.locale: "zh-CN"
+
+# =================== Frequently used (Optional)===================
+
+# =================== Saved Objects: Migrations ===================
+# Saved object migrations run at startup. If you run into migration-related issues, you might need to adjust these settings.
+
+# The number of documents migrated at a time.
+# If Kibana can't start up or upgrade due to an Elasticsearch `circuit_breaking_exception`,
+# use a smaller batchSize value to reduce the memory pressure. Defaults to 1000 objects per batch.
+#migrations.batchSize: 1000
+
+# The maximum payload size for indexing batches of upgraded saved objects.
+# To avoid migrations failing due to a 413 Request Entity Too Large response from Elasticsearch.
+# This value should be lower than or equal to your Elasticsearch cluster’s `http.max_content_length`
+# configuration option. Default: 100mb
+#migrations.maxBatchSizeBytes: 100mb
+
+# The number of times to retry temporary migration failures. Increase the setting
+# if migrations fail frequently with a message such as `Unable to complete the [...] step after
+# 15 attempts, terminating`. Defaults to 15
+#migrations.retryAttempts: 15
+
+# =================== Search Autocomplete ===================
+# Time in milliseconds to wait for autocomplete suggestions from Elasticsearch.
+# This value must be a whole number greater than zero. Defaults to 1000ms
+#unifiedSearch.autocomplete.valueSuggestions.timeout: 1000
+
+# Maximum number of documents loaded by each shard to generate autocomplete suggestions.
+# This value must be a whole number greater than zero. Defaults to 100_000
+#unifiedSearch.autocomplete.valueSuggestions.terminateAfter: 100000
@@ -0,0 +1,45 @@
+additionalProperties:
+  formFields:
+    - default: "/home/kibana"
+      edit: true
+      envKey: BARK_ROOT_PATH
+      labelZh: 数据持久化路径
+      labelEn: Data persistence path
+      required: true
+      type: text
+    - default: 5601
+      edit: true
+      envKey: PANEL_APP_PORT_HTTP
+      labelZh: WebUI 端口
+      labelEn: WebUI port
+      required: true
+      rule: paramPort
+      type: number
+    - default: "['http://127.0.0.1:9200']"
+      edit: true
+      envKey: ELASTICSEARCH_HOSTS
+      labelZh: Elasticsearch 地址
+      labelEn: Elasticsearch address
+      required: true
+      type: text
+    - default: ""
+      edit: true
+      envKey: ELASTICSEARCH_USERNAME
+      labelZh: Elasticsearch 用户名
+      labelEn: Elasticsearch username
+      required: false
+      type: text
+    - default: ""
+      edit: true
+      envKey: ELASTICSEARCH_PASSWORD
+      labelZh: Elasticsearch 密码
+      labelEn: Elasticsearch password
+      required: false
+      type: password
+    - default: ""
+      edit: true
+      envKey: ELASTICSEARCH_SERVICEACCOUNTTOKEN
+      labelZh: Elasticsearch 服务 账户令牌
+      labelEn: Elasticsearch service account token
+      required: false
+      type: password
@@ -0,0 +1,32 @@
+version: "3.8"
+
+networks:
+  1panel-network:
+    external: true
+
+services:
+  kibana:
+    image: kibana:8.14.3
+    container_name: ${CONTAINER_NAME}
+    labels:
+      createdBy: "Apps"
+    restart: always
+    networks:
+      - 1panel-network
+    ports:
+      - ${PANEL_APP_PORT_HTTP}:5601
+    env_file:
+      - /etc/1panel/envs/global.env
+      - ${ENV_FILE:-/etc/1panel/envs/default.env}
+    volumes:
+      - ./config/kibana.yml:/usr/share/kibana/config/kibana.yml
+      - ${BARK_ROOT_PATH}/config:/usr/share/kibana/config
+      - ${BARK_ROOT_PATH}/data:/usr/share/kibana/data
+    environment:
+      - SERVER_PORT=5601
+      - SERVER_NAME="kibana-node"
+      - SERVER_HOST="0.0.0.0"
+      - I18N_LOCALE="zh-CN"
+      - SERVER_REWRITEBASEPATH=false
+      - SERVER_BASEPATH=""
+      - SERVER_PUBLICBASEURL=""
@@ -0,0 +1,15 @@
+#!/bin/bash
+
+if [ -f .env ]; then
+  source .env
+
+  # setup-1 add default values
+  CURRENT_DIR=$(pwd)
+  sed -i '/^ENV_FILE=/d' .env
+  echo "ENV_FILE=${CURRENT_DIR}/.env" >> .env
+
+  echo "Check Finish."
+
+else
+  echo "Error: .env file not found."
+fi
@@ -0,0 +1,10 @@
+#!/bin/bash
+
+if [ -f .env ]; then
+  source .env
+
+  echo "Check Finish."
+
+else
+  echo "Error: .env file not found."
+fi
@@ -0,0 +1,15 @@
+#!/bin/bash
+
+if [ -f .env ]; then
+  source .env
+
+  # setup-1 add default values
+  CURRENT_DIR=$(pwd)
+  sed -i '/^ENV_FILE=/d' .env
+  echo "ENV_FILE=${CURRENT_DIR}/.env" >> .env
+
+  echo "Check Finish."
+
+else
+  echo "Error: .env file not found."
+fi
@@ -0,0 +1,46 @@
+# Kibana
+
+Kibana 是一个用户界面，可让您可视化 Elasticsearch 数据并导航 Elastic Stack。通过本教程了解可视化数据的基础知识。
+
+![Kibana](https://file.lifebus.top/imgs/kibana_cover.png)
+
+Kibana 适合管理员、分析师和业务用户。作为管理员，您的角色是管理 Elastic Stack，从创建部署到将 Elasticsearch 数据导入
+Kibana，然后管理数据。
+作为分析师，您希望发现数据中的见解、在仪表板上可视化您的数据并分享您的发现。作为业务用户，您希望查看现有仪表板并深入了解详细信息。
+
+Kibana 适用于所有类型的数据。您的数据可以是结构化或非结构化文本、数字数据、时间序列数据、地理空间数据、日志、指标、安全事件等。无论您的数据是什么，Kibana
+都可以帮助您发现模式和关系并可视化结果。
+
+## 特性
+
+ 搜索、观察和保护您的数据
+
+从发现文档到分析日志再到查找安全漏洞，Kibana 是您访问这些功能及其他功能的门户。
+
+ 分析您的数据
+
+搜索隐藏的见解，可视化您在图表、仪表、地图、图形等中发现的内容，并将它们组合在仪表板中。
+
+ 管理、监控和保护 Elastic Stack
+
+管理您的数据、监控 Elastic Stack 集群的运行状况并控制哪些用户可以访问哪些功能。
+
+## 安装说明
+
+> 登录账户信息，请从 `Elasticsearch` 日志中获取账户信息
+>
+> 注册令牌，请从 `Elasticsearch` 日志中获取注册令牌信息
+>
+> 首次登录地址，请查看日志获取登录地址信息
+>
+> http://127.0.0.1:5601?code=xxxxxx
+
+### 登录方式
+
+ `用户名 + 密码`
+
+通过 `elastic` 或 `kibana_system` 用户 + `密码` 登录
+
+ `Elasticsearch 服务 账户令牌`
+
+通过 `Elasticsearch` 服务账户令牌登录，需要在 `Elasticsearch` 服务中获取
@@ -0,0 +1,19 @@
+name: Kibana
+title: 可视化Elasticsearch数据并导航Elastic堆栈
+description: 可视化Elasticsearch数据并导航Elastic堆栈
+additionalProperties:
+  key: kibana
+  name: Kibana
+  tags:
+    - WebSite
+    - Middleware
+    - Tool
+    - Local
+  shortDescZh: 可视化Elasticsearch数据并导航Elastic堆栈
+  shortDescEn: Visualize Elasticsearch data and navigate the Elastic stack
+  type: website
+  crossVersionUpdate: true
+  limit: 0
+  website: https://www.elastic.co/
+  github: https://github.com/elastic/kibana/
+  document: https://www.elastic.co/docs/