应用标准化

Signed-off-by: Meng Sen <qyg2297248353@gmail.com>
2024-12-01 08:02:22 +08:00 · 2024-11-27 18:40:30 +08:00 · 2024-11-27 18:40:30 +08:00 · 1165dcd41c
commit 1165dcd41c
parent 0555c9b2a6
26 changed files with 1180 additions and 7 deletions
--- a/apps/mailserver/14.0.0/docker-compose.yml
+++ b/apps/mailserver/14.0.0/docker-compose.yml
@ -29,7 +29,7 @@ services:
      - ${PANEL_APP_PORT_MANAGESIEVE}:4190
    env_file:
      - ${GLOBAL_ENV_FILE:-/etc/1panel/envs/global.env}
-      - /etc/1panel/envs/mailserver/mailserver.env
+      - ${APP_ENV_FILE:-/etc/1panel/envs/mailserver/mailserver.env}
      - ${ENV_FILE:-/etc/1panel/envs/default.env}
    volumes:
      - /etc/localtime:/etc/localtime:ro
--- a/apps/mailserver/14.0.0/envs/mailserver.env
+++ b/apps/mailserver/14.0.0/envs/mailserver.env
@ -0,0 +1,661 @@
+# -----------------------------------------------
+# --- Mailserver Environment Variables ----------
+# -----------------------------------------------
+
+# DOCUMENTATION FOR THESE VARIABLES IS FOUND UNDER
+# https://docker-mailserver.github.io/docker-mailserver/latest/config/environment/
+
+# -----------------------------------------------
+# --- General Section ---------------------------
+# -----------------------------------------------
+
+# empty => uses the `hostname` command to get the mail server's canonical hostname
+# => Specify a fully-qualified domainname to serve mail for.  This is used for many of the config features so if you can't set your hostname (e.g. you're in a container platform that doesn't let you) specify it in this environment variable.
+OVERRIDE_HOSTNAME=
+
+# REMOVED in version v11.0.0! Use LOG_LEVEL instead.
+DMS_DEBUG=0
+
+# Set the log level for DMS.
+# This is mostly relevant for container startup scripts and change detection event feedback.
+#
+# Valid values (in order of increasing verbosity) are: `error`, `warn`, `info`, `debug` and `trace`.
+# The default log level is `info`.
+LOG_LEVEL=info
+
+# critical => Only show critical messages
+# error => Only show erroneous output
+# **warn** => Show warnings
+# info => Normal informational output
+# debug => Also show debug messages
+SUPERVISOR_LOGLEVEL=
+
+# Support for deployment where these defaults are not compatible (eg: some NAS appliances):
+# /var/mail vmail User ID (default: 5000)
+DMS_VMAIL_UID=
+# /var/mail vmail Group ID (default: 5000)
+DMS_VMAIL_GID=
+
+# **empty** => use FILE
+# LDAP => use LDAP authentication
+# OIDC => use OIDC authentication (not yet implemented)
+# FILE => use local files (this is used as the default)
+ACCOUNT_PROVISIONER=
+
+# empty => postmaster@domain.com
+# => Specify the postmaster address
+POSTMASTER_ADDRESS=
+
+# Check for updates on container start and then once a day
+# If an update is available, a mail is sent to POSTMASTER_ADDRESS
+# 0 => Update check disabled
+# 1 => Update check enabled
+ENABLE_UPDATE_CHECK=0
+
+# Customize the update check interval.
+# Number + Suffix. Suffix must be 's' for seconds, 'm' for minutes, 'h' for hours or 'd' for days.
+UPDATE_CHECK_INTERVAL=1d
+
+# Set different options for mynetworks option (can be overwrite in postfix-main.cf)
+# **WARNING**: Adding the docker network's gateway to the list of trusted hosts, e.g. using the `network` or
+# `connected-networks` option, can create an open relay
+# https://github.com/docker-mailserver/docker-mailserver/issues/1405#issuecomment-590106498
+# The same can happen for rootless podman. To prevent this, set the value to "none" or configure slirp4netns
+# https://github.com/docker-mailserver/docker-mailserver/issues/2377
+#
+# none => Explicitly force authentication
+# container => Container IP address only
+# host => Add docker container network (ipv4 only)
+# network => Add all docker container networks (ipv4 only)
+# connected-networks => Add all connected docker networks (ipv4 only)
+PERMIT_DOCKER=none
+
+# Set the timezone. If this variable is unset, the container runtime will try to detect the time using
+# `/etc/localtime`, which you can alternatively mount into the container. The value of this variable
+# must follow the pattern `AREA/ZONE`, i.e. of you want to use Germany's time zone, use `Europe/Berlin`.
+# You can lookup all available timezones here: https://en.wikipedia.org/wiki/List_of_tz_database_time_zones#List
+TZ=Asia/Shanghai
+
+# In case you network interface differs from 'eth0', e.g. when you are using HostNetworking in Kubernetes,
+# you can set NETWORK_INTERFACE to whatever interface you want. This interface will then be used.
+#  - **empty** => eth0
+NETWORK_INTERFACE=
+
+# empty => modern
+# modern => Enables TLSv1.2 and modern ciphers only. (default)
+# intermediate => Enables TLSv1, TLSv1.1 and TLSv1.2 and broad compatibility ciphers.
+TLS_LEVEL=
+
+# Configures the handling of creating mails with forged sender addresses.
+#
+# **0** => (not recommended) Mail address spoofing allowed. Any logged in user may create email messages with a forged sender address (see also https://en.wikipedia.org/wiki/Email_spoofing).
+# 1 => Mail spoofing denied. Each user may only send with his own or his alias addresses. Addresses with extension delimiters(http://www.postfix.org/postconf.5.html#recipient_delimiter) are not able to send messages.
+SPOOF_PROTECTION=
+
+# Enables the Sender Rewriting Scheme. SRS is needed if your mail server acts as forwarder. See [postsrsd](https://github.com/roehling/postsrsd/blob/master/README.md#sender-rewriting-scheme-crash-course) for further explanation.
+#  - **0** => Disabled
+#  - 1 => Enabled
+ENABLE_SRS=0
+
+# Enables the OpenDKIM service.
+# **1** => Enabled
+#   0   => Disabled
+ENABLE_OPENDKIM=1
+
+# Enables the OpenDMARC service.
+# **1** => Enabled
+#   0   => Disabled
+ENABLE_OPENDMARC=1
+
+
+# Enabled `policyd-spf` in Postfix's configuration. You will likely want to set this
+# to `0` in case you're using Rspamd (`ENABLE_RSPAMD=1`).
+#
+# - 0     => Disabled
+# - **1** => Enabled
+ENABLE_POLICYD_SPF=1
+
+# Enables POP3 service
+# - **0** => Disabled
+# - 1     => Enabled
+ENABLE_POP3=
+
+# Enables IMAP service
+# - 0     => Disabled
+# - **1** => Enabled
+ENABLE_IMAP=1
+
+# Enables ClamAV, and anti-virus scanner.
+#   1   => Enabled
+# **0** => Disabled
+ENABLE_CLAMAV=0
+
+# Add the value of this ENV as a prefix to the mail subject when spam is detected.
+# NOTE: This subject prefix may be redundant (by default spam is delivered to a junk folder).
+#       It provides value when your junk mail is stored alongside legitimate mail instead of a separate location (like with `SPAMASSASSIN_SPAM_TO_INBOX=1` or `MOVE_SPAM_TO_JUNK=0` or a POP3 only setup, without IMAP).
+# NOTE: When not using Docker Compose, other CRI may not support quote-wrapping the value here to preserve any trailing white-space.
+SPAM_SUBJECT=
+
+# Enables Rspamd
+# **0** => Disabled
+#   1   => Enabled
+ENABLE_RSPAMD=1
+
+# When `ENABLE_RSPAMD=1`, an internal Redis instance is enabled implicitly.
+# This setting provides an opt-out to allow using an external instance instead.
+# 0 => Disabled
+# 1 => Enabled
+ENABLE_RSPAMD_REDIS=
+
+# When enabled,
+#
+# 1. the "[autolearning][rspamd-autolearn]" feature is turned on;
+# 2. the Bayes classifier will be trained when moving mails from or to the Junk folder (with the help of Sieve scripts).
+#
+# **0** => disabled
+# 1     => enabled
+RSPAMD_LEARN=1
+
+# This settings controls whether checks should be performed on emails coming
+# from authenticated users (i.e. most likely outgoing emails). The default value
+# is `0` in order to align better with SpamAssassin. We recommend reading
+# through https://rspamd.com/doc/tutorials/scanning_outbound.html though to
+# decide for yourself whether you need and want this feature.
+#
+# Note that DKIM signing of e-mails will still happen.
+RSPAMD_CHECK_AUTHENTICATED=0
+
+# Controls whether the Rspamd Greylisting module is enabled.
+# This module can further assist in avoiding spam emails by greylisting
+# e-mails with a certain spam score.
+#
+# **0** => disabled
+# 1     => enabled
+RSPAMD_GREYLISTING=1
+
+# Can be used to enable or disable the Hfilter group module.
+#
+# - 0     => Disabled
+# - **1** => Enabled
+RSPAMD_HFILTER=1
+
+# Can be used to control the score when the HFILTER_HOSTNAME_UNKNOWN symbol applies. A higher score is more punishing. Setting it to 15 is equivalent to rejecting the email when the check fails.
+#
+# Default: 6
+RSPAMD_HFILTER_HOSTNAME_UNKNOWN_SCORE=6
+
+# Can be used to enable or disable the (still experimental) neural module.
+#
+# - **0** => Disabled
+# - 1     => Enabled
+RSPAMD_NEURAL=0
+
+# Amavis content filter (used for ClamAV & SpamAssassin)
+# 0 => Disabled
+# 1 => Enabled
+ENABLE_AMAVIS=0
+
+# -1/-2/-3 => Only show errors
+# **0**    => Show warnings
+# 1/2      => Show default informational output
+# 3/4/5    => log debug information (very verbose)
+AMAVIS_LOGLEVEL=0
+
+# This enables DNS block lists in Postscreen.
+# Note: Emails will be rejected, if they don't pass the block list checks!
+# **0** => DNS block lists are disabled
+# 1     => DNS block lists are enabled
+ENABLE_DNSBL=0
+
+# If you enable Fail2Ban, don't forget to add the following lines to your `compose.yaml`:
+#    cap_add:
+#      - NET_ADMIN
+# Otherwise, `nftables` won't be able to ban IPs.
+ENABLE_FAIL2BAN=0
+
+# Fail2Ban blocktype
+# drop   => drop packet (send NO reply)
+# reject => reject packet (send ICMP unreachable)
+FAIL2BAN_BLOCKTYPE=drop
+
+# 1 => Enables Managesieve on port 4190
+# empty => disables Managesieve
+ENABLE_MANAGESIEVE=
+
+# **enforce** => Allow other tests to complete. Reject attempts to deliver mail with a 550 SMTP reply, and log the helo/sender/recipient information. Repeat this test the next time the client connects.
+# drop => Drop the connection immediately with a 521 SMTP reply. Repeat this test the next time the client connects.
+# ignore => Ignore the failure of this test. Allow other tests to complete. Repeat this test the next time the client connects. This option is useful for testing and collecting statistics without blocking mail.
+POSTSCREEN_ACTION=enforce
+
+# empty => all daemons start
+# 1 => only launch postfix smtp
+SMTP_ONLY=
+
+# Please read [the SSL page in the documentation](https://docker-mailserver.github.io/docker-mailserver/latest/config/security/ssl) for more information.
+#
+# empty => SSL disabled
+# letsencrypt => Enables Let's Encrypt certificates
+# custom => Enables custom certificates
+# manual => Let's you manually specify locations of your SSL certificates for non-standard cases
+# self-signed => Enables self-signed certificates
+SSL_TYPE=
+
+# These are only supported with `SSL_TYPE=manual`.
+# Provide the path to your cert and key files that you've mounted access to within the container.
+SSL_CERT_PATH=
+SSL_KEY_PATH=
+# Optional: A 2nd certificate can be supported as fallback (dual cert support), eg ECDSA with an RSA fallback.
+# Useful for additional compatibility with older MTA and MUA (eg pre-2015).
+SSL_ALT_CERT_PATH=
+SSL_ALT_KEY_PATH=
+
+# Set how many days a virusmail will stay on the server before being deleted
+# empty => 7 days
+VIRUSMAILS_DELETE_DELAY=
+
+# Configure Postfix `virtual_transport` to deliver mail to a different LMTP client (default is a dovecot socket).
+# Provide any valid URI. Examples:
+#
+# empty => `lmtp:unix:/var/run/dovecot/lmtp` (default, configured in Postfix main.cf)
+# `lmtp:unix:private/dovecot-lmtp` (use socket)
+# `lmtps:inet:<host>:<port>` (secure lmtp with starttls)
+# `lmtp:<kopano-host>:2003` (use kopano as mailstore)
+POSTFIX_DAGENT=
+
+# Set the mailbox size limit for all users. If set to zero, the size will be unlimited (default). Size is in bytes.
+#
+# empty => 0
+POSTFIX_MAILBOX_SIZE_LIMIT=
+
+# See https://docker-mailserver.github.io/docker-mailserver/latest/config/account-management/overview/#quotas
+# 0 => Dovecot quota is disabled
+# 1 => Dovecot quota is enabled
+ENABLE_QUOTAS=1
+
+# Set the message size limit for all users. If set to zero, the size will be unlimited (not recommended!). Size is in bytes.
+#
+# empty => 10240000 (~10 MB)
+POSTFIX_MESSAGE_SIZE_LIMIT=
+
+# Mails larger than this limit won't be scanned.
+# ClamAV must be enabled (ENABLE_CLAMAV=1) for this.
+#
+# empty => 25M (25 MB)
+CLAMAV_MESSAGE_SIZE_LIMIT=
+
+# Enables regular pflogsumm mail reports.
+# This is a new option. The old REPORT options are still supported for backwards compatibility. If this is not set and reports are enabled with the old options, logrotate will be used.
+#
+# not set => No report
+# daily_cron => Daily report for the previous day
+# logrotate => Full report based on the mail log when it is rotated
+PFLOGSUMM_TRIGGER=
+
+# Recipient address for pflogsumm reports.
+#
+# not set => Use REPORT_RECIPIENT or POSTMASTER_ADDRESS
+# => Specify the recipient address(es)
+PFLOGSUMM_RECIPIENT=
+
+# Sender address (`FROM`) for pflogsumm reports if pflogsumm reports are enabled.
+#
+# not set => Use REPORT_SENDER
+# => Specify the sender address
+PFLOGSUMM_SENDER=
+
+# Interval for logwatch report.
+#
+# none => No report is generated
+# daily => Send a daily report
+# weekly => Send a report every week
+LOGWATCH_INTERVAL=
+
+# Recipient address for logwatch reports if they are enabled.
+#
+# not set => Use REPORT_RECIPIENT or POSTMASTER_ADDRESS
+# => Specify the recipient address(es)
+LOGWATCH_RECIPIENT=
+
+# Sender address (`FROM`) for logwatch reports if logwatch reports are enabled.
+#
+# not set => Use REPORT_SENDER
+# => Specify the sender address
+LOGWATCH_SENDER=
+
+# Defines who receives reports if they are enabled.
+# **empty** => ${POSTMASTER_ADDRESS}
+# => Specify the recipient address
+REPORT_RECIPIENT=
+
+# Defines who sends reports if they are enabled.
+# **empty** => mailserver-report@${DOMAINNAME}
+# => Specify the sender address
+REPORT_SENDER=
+
+# Changes the interval in which log files are rotated
+# **weekly** => Rotate log files weekly
+# daily => Rotate log files daily
+# monthly => Rotate log files monthly
+#
+# Note: This Variable actually controls logrotate inside the container
+# and rotates the log files depending on this setting. The main log output is
+# still available in its entirety via `docker logs mail` (Or your
+# respective container name). If you want to control logrotation for
+# the Docker-generated logfile see:
+# https://docs.docker.com/config/containers/logging/configure/
+#
+# Note: This variable can also determine the interval for Postfix's log summary reports, see [`PFLOGSUMM_TRIGGER`](#pflogsumm_trigger).
+LOGROTATE_INTERVAL=weekly
+
+# Defines how many log files are kept by logrorate
+LOGROTATE_COUNT=4
+
+
+# If enabled, employs `reject_unknown_client_hostname` to sender restrictions in Postfix's configuration.
+#
+# - **0** => Disabled
+# - 1 => Enabled
+POSTFIX_REJECT_UNKNOWN_CLIENT_HOSTNAME=0
+
+# Choose TCP/IP protocols for postfix to use
+# **all** => All possible protocols.
+# ipv4 => Use only IPv4 traffic. Most likely you want this behind Docker.
+# ipv6 => Use only IPv6 traffic.
+#
+# Note: More details at http://www.postfix.org/postconf.5.html#inet_protocols
+POSTFIX_INET_PROTOCOLS=all
+
+# Enables MTA-STS support for outbound mail.
+# More details: https://docker-mailserver.github.io/docker-mailserver/v13.3/config/best-practices/mta-sts/
+# - **0** ==> MTA-STS disabled
+# - 1 => MTA-STS enabled
+ENABLE_MTA_STS=0
+
+# Choose TCP/IP protocols for dovecot to use
+# **all** => Listen on all interfaces
+# ipv4 => Listen only on IPv4 interfaces. Most likely you want this behind Docker.
+# ipv6 => Listen only on IPv6 interfaces.
+#
+# Note: More information at https://dovecot.org/doc/dovecot-example.conf
+DOVECOT_INET_PROTOCOLS=all
+
+# -----------------------------------------------
+# --- SpamAssassin Section ----------------------
+# -----------------------------------------------
+
+ENABLE_SPAMASSASSIN=0
+
+# KAM is a 3rd party SpamAssassin ruleset, provided by the McGrail Foundation.
+# If SpamAssassin is enabled, KAM can be used in addition to the default ruleset.
+# - **0** => KAM disabled
+# - 1 => KAM enabled
+#
+# Note: only has an effect if `ENABLE_SPAMASSASSIN=1`
+ENABLE_SPAMASSASSIN_KAM=1
+
+# deliver spam messages to the inbox (tagged using SPAM_SUBJECT)
+SPAMASSASSIN_SPAM_TO_INBOX=1
+
+# spam messages will be moved in the Junk folder (SPAMASSASSIN_SPAM_TO_INBOX=1 required)
+MOVE_SPAM_TO_JUNK=1
+
+# spam messages will be marked as read
+MARK_SPAM_AS_READ=1
+
+# add 'spam info' headers at, or above this level
+SA_TAG=2.0
+
+# add 'spam detected' headers at, or above this level
+SA_TAG2=6.31
+
+# triggers spam evasive actions
+SA_KILL=10.0
+
+# -----------------------------------------------
+# --- Fetchmail Section -------------------------
+# -----------------------------------------------
+
+ENABLE_FETCHMAIL=0
+
+# The interval to fetch mail in seconds
+FETCHMAIL_POLL=300
+# Use multiple fetchmail instances (1 per poll entry in fetchmail.cf)
+# Supports multiple IMAP IDLE connections when a server is used across multiple poll entries
+# https://otremba.net/wiki/Fetchmail_(Debian)#Immediate_Download_via_IMAP_IDLE
+FETCHMAIL_PARALLEL=0
+
+# Enable or disable `getmail`.
+#
+# - **0** => Disabled
+# - 1 => Enabled
+ENABLE_GETMAIL=0
+
+# The number of minutes for the interval. Min: 1; Max: 30.
+GETMAIL_POLL=5
+
+# -----------------------------------------------
+# --- OAUTH2 Section ----------------------------
+# -----------------------------------------------
+
+# empty => OAUTH2 authentication is disabled
+# 1 => OAUTH2 authentication is enabled
+ENABLE_OAUTH2=
+
+# Specify the user info endpoint URL of the oauth2 provider
+# Example: https://oauth2.example.com/userinfo/
+OAUTH2_INTROSPECTION_URL=
+
+# -----------------------------------------------
+# --- LDAP Section ------------------------------
+# -----------------------------------------------
+
+# A second container for the ldap service is necessary (i.e. https://hub.docker.com/r/bitnami/openldap/)
+
+# empty => no
+# yes => LDAP over TLS enabled for Postfix
+LDAP_START_TLS=
+
+# empty => mail.example.com
+# Specify the `<dns-name>` / `<ip-address>` where the LDAP server is reachable via a URI like: `ldaps://mail.example.com`.
+# Note: You must include the desired URI scheme (`ldap://`, `ldaps://`, `ldapi://`).
+LDAP_SERVER_HOST=
+
+# empty => ou=people,dc=domain,dc=com
+# => e.g. LDAP_SEARCH_BASE=dc=mydomain,dc=local
+LDAP_SEARCH_BASE=
+
+# empty => cn=admin,dc=domain,dc=com
+# => take a look at examples of SASL_LDAP_BIND_DN
+LDAP_BIND_DN=
+
+# empty** => admin
+# => Specify the password to bind against ldap
+LDAP_BIND_PW=
+
+# e.g. `"(&(mail=%s)(mailEnabled=TRUE))"`
+# => Specify how ldap should be asked for users
+LDAP_QUERY_FILTER_USER=
+
+# e.g. `"(&(mailGroupMember=%s)(mailEnabled=TRUE))"`
+# => Specify how ldap should be asked for groups
+LDAP_QUERY_FILTER_GROUP=
+
+# e.g. `"(&(mailAlias=%s)(mailEnabled=TRUE))"`
+# => Specify how ldap should be asked for aliases
+LDAP_QUERY_FILTER_ALIAS=
+
+# e.g. `"(&(|(mail=*@%s)(mailalias=*@%s)(mailGroupMember=*@%s))(mailEnabled=TRUE))"`
+# => Specify how ldap should be asked for domains
+LDAP_QUERY_FILTER_DOMAIN=
+
+# -----------------------------------------------
+# --- Dovecot Section ---------------------------
+# -----------------------------------------------
+
+# empty => no
+# yes => LDAP over TLS enabled for Dovecot
+DOVECOT_TLS=
+
+# e.g. `"(&(objectClass=PostfixBookMailAccount)(uniqueIdentifier=%n))"`
+DOVECOT_USER_FILTER=
+
+# e.g. `"(&(objectClass=PostfixBookMailAccount)(uniqueIdentifier=%n))"`
+DOVECOT_PASS_FILTER=
+
+# Define the mailbox format to be used
+# default is maildir, supported values are: sdbox, mdbox, maildir
+DOVECOT_MAILBOX_FORMAT=maildir
+
+# empty => no
+# yes => Allow bind authentication for LDAP
+# https://wiki.dovecot.org/AuthDatabase/LDAP/AuthBinds
+DOVECOT_AUTH_BIND=
+
+# -----------------------------------------------
+# --- Postgrey Section --------------------------
+# -----------------------------------------------
+
+ENABLE_POSTGREY=0
+# greylist for N seconds
+POSTGREY_DELAY=300
+# delete entries older than N days since the last time that they have been seen
+POSTGREY_MAX_AGE=35
+# response when a mail is greylisted
+POSTGREY_TEXT="Delayed by Postgrey"
+# whitelist host after N successful deliveries (N=0 to disable whitelisting)
+POSTGREY_AUTO_WHITELIST_CLIENTS=5
+
+# -----------------------------------------------
+# --- SASL Section ------------------------------
+# -----------------------------------------------
+
+ENABLE_SASLAUTHD=0
+
+# empty => pam
+# `ldap` => authenticate against ldap server
+# `shadow` => authenticate against local user db
+# `mysql` => authenticate against mysql db
+# `rimap` => authenticate against imap server
+# Note: can be a list of mechanisms like pam ldap shadow
+SASLAUTHD_MECHANISMS=
+
+# empty => None
+# e.g. with SASLAUTHD_MECHANISMS rimap you need to specify the ip-address/servername of the imap server  ==> xxx.xxx.xxx.xxx
+SASLAUTHD_MECH_OPTIONS=
+
+# empty => Use value of LDAP_SERVER_HOST
+# Note: You must include the desired URI scheme (`ldap://`, `ldaps://`, `ldapi://`).
+SASLAUTHD_LDAP_SERVER=
+
+# empty => Use value of LDAP_BIND_DN
+# specify an object with privileges to search the directory tree
+# e.g. active directory: SASLAUTHD_LDAP_BIND_DN=cn=Administrator,cn=Users,dc=mydomain,dc=net
+# e.g. openldap: SASLAUTHD_LDAP_BIND_DN=cn=admin,dc=mydomain,dc=net
+SASLAUTHD_LDAP_BIND_DN=
+
+# empty => Use value of LDAP_BIND_PW
+SASLAUTHD_LDAP_PASSWORD=
+
+# empty => Use value of LDAP_SEARCH_BASE
+# specify the search base
+SASLAUTHD_LDAP_SEARCH_BASE=
+
+# empty => default filter `(&(uniqueIdentifier=%u)(mailEnabled=TRUE))`
+# e.g. for active directory: `(&(sAMAccountName=%U)(objectClass=person))`
+# e.g. for openldap: `(&(uid=%U)(objectClass=person))`
+SASLAUTHD_LDAP_FILTER=
+
+# empty => no
+# yes => LDAP over TLS enabled for SASL
+# If set to yes, the protocol in SASLAUTHD_LDAP_SERVER must be ldap:// or missing.
+SASLAUTHD_LDAP_START_TLS=
+
+# empty => no
+# yes => Require and verify server certificate
+# If yes you must/could specify SASLAUTHD_LDAP_TLS_CACERT_FILE or SASLAUTHD_LDAP_TLS_CACERT_DIR.
+SASLAUTHD_LDAP_TLS_CHECK_PEER=
+
+# File containing CA (Certificate Authority) certificate(s).
+# empty => Nothing is added to the configuration
+# Any value => Fills the `ldap_tls_cacert_file` option
+SASLAUTHD_LDAP_TLS_CACERT_FILE=
+
+# Path to directory with CA (Certificate Authority) certificates.
+# empty => Nothing is added to the configuration
+# Any value => Fills the `ldap_tls_cacert_dir` option
+SASLAUTHD_LDAP_TLS_CACERT_DIR=
+
+# Specify what password attribute to use for password verification.
+# empty => Nothing is added to the configuration but the documentation says it is `userPassword` by default.
+# Any value => Fills the `ldap_password_attr` option
+SASLAUTHD_LDAP_PASSWORD_ATTR=
+
+# empty => `bind` will be used as a default value
+# `fastbind` => The fastbind method is used
+# `custom` => The custom method uses userPassword attribute to verify the password
+SASLAUTHD_LDAP_AUTH_METHOD=
+
+# Specify the authentication mechanism for SASL bind
+# empty => Nothing is added to the configuration
+# Any value => Fills the `ldap_mech` option
+SASLAUTHD_LDAP_MECH=
+
+# -----------------------------------------------
+# --- SRS Section -------------------------------
+# -----------------------------------------------
+
+# envelope_sender => Rewrite only envelope sender address (default)
+# header_sender => Rewrite only header sender (not recommended)
+# envelope_sender,header_sender => Rewrite both senders
+# An email has an "envelope" sender (indicating the sending server) and a
+# "header" sender (indicating who sent it). More strict SPF policies may require
+# you to replace both instead of just the envelope sender.
+SRS_SENDER_CLASSES=envelope_sender
+
+# empty => Envelope sender will be rewritten for all domains
+# provide comma separated list of domains to exclude from rewriting
+SRS_EXCLUDE_DOMAINS=
+
+# empty => generated when the image is built
+# provide a secret to use in base64
+# you may specify multiple keys, comma separated. the first one is used for
+# signing and the remaining will be used for verification. this is how you
+# rotate and expire keys
+SRS_SECRET=
+
+# -----------------------------------------------
+# --- Default Relay Host Section ----------------
+# -----------------------------------------------
+
+# Setup relaying all mail through a default relay host
+#
+# Set a default host to relay all mail through (optionally include a port)
+# Example: [mail.example.com]:587
+DEFAULT_RELAY_HOST=
+
+# -----------------------------------------------
+# --- Multi-Domain Relay Section ----------------
+# -----------------------------------------------
+
+# Setup relaying for multiple domains based on the domain name of the sender
+# optionally uses usernames and passwords in postfix-sasl-password.cf and relay host mappings in postfix-relaymap.cf
+#
+# Set a default host to relay mail through
+# Example: mail.example.com
+RELAY_HOST=
+
+# empty => 25
+# default port to relay mail
+RELAY_PORT=25
+
+# -----------------------------------------------
+# --- Relay Host Credentials Section ------------
+# -----------------------------------------------
+
+# Configure a relay user and password to use with RELAY_HOST / DEFAULT_RELAY_HOST
+
+# empty => no default
+RELAY_USER=
+
+# empty => no default
+RELAY_PASSWORD=
--- a/apps/mailserver/14.0.0/scripts/init.sh
+++ b/apps/mailserver/14.0.0/scripts/init.sh
@ -7,8 +7,10 @@ if [ -f .env ]; then
  CURRENT_DIR=$(pwd)
  sed -i '/^ENV_FILE=/d' .env
  sed -i '/^GLOBAL_ENV_FILE=/d' .env
+  sed -i '/^APP_ENV_FILE=/d' .env
  echo "ENV_FILE=${CURRENT_DIR}/.env" >> .env
  echo "GLOBAL_ENV_FILE=${CURRENT_DIR}/envs/global.env" >> .env
+  echo "APP_ENV_FILE=${CURRENT_DIR}/envs/mailserver.env" >> .env

  echo "Check Finish."

--- a/apps/mailserver/14.0.0/scripts/upgrade.sh
+++ b/apps/mailserver/14.0.0/scripts/upgrade.sh
@ -7,8 +7,10 @@ if [ -f .env ]; then
  CURRENT_DIR=$(pwd)
  sed -i '/^ENV_FILE=/d' .env
  sed -i '/^GLOBAL_ENV_FILE=/d' .env
+  sed -i '/^APP_ENV_FILE=/d' .env
  echo "ENV_FILE=${CURRENT_DIR}/.env" >> .env
  echo "GLOBAL_ENV_FILE=${CURRENT_DIR}/envs/global.env" >> .env
+  echo "APP_ENV_FILE=${CURRENT_DIR}/envs/mailserver.env" >> .env

  echo "Check Finish."

--- a/apps/movie-pilot/1.9.17/docker-compose.yml
+++ b/apps/movie-pilot/1.9.17/docker-compose.yml
@ -16,7 +16,7 @@ services:
      - ${PANEL_APP_PORT_API}:3001
    env_file:
      - ${GLOBAL_ENV_FILE:-/etc/1panel/envs/global.env}
-      - /etc/1panel/envs/movie-pilot/movie-pilot.env
+      - ${APP_ENV_FILE:-/etc/1panel/envs/movie-pilot/movie-pilot.env}
      - ${ENV_FILE:-/etc/1panel/envs/default.env}
    volumes:
      - /var/run/docker.sock:/var/run/docker.sock
--- a/apps/movie-pilot/1.9.17/envs/movie-pilot.env
+++ b/apps/movie-pilot/1.9.17/envs/movie-pilot.env
@ -0,0 +1,53 @@
+#######################################################################
+# 【*】为必配项，其余为选配项，选配项可以删除整项配置项或者保留配置默认值       #
+#######################################################################
+# 【*】API监听地址（注意不是前端访问地址）
+HOST=0.0.0.0
+# 是否调试模式，打开后将输出更多日志
+DEBUG=false
+# 是否开发模式，打开后后台服务将不会启动
+DEV=false
+# 【*】超级管理员，设置后一但重启将固化到数据库中，修改将无效（初始化超级管理员密码仅会生成一次，请在日志中查看并自行登录系统修改）
+SUPERUSER=admin
+# 大内存模式，开启后会增加缓存数量，但会占用更多内存
+BIG_MEMORY_MODE=false
+# 是否启用DOH域名解析，启用后对于api.themovie.org等域名通过DOH解析，避免域名DNS被污染
+DOH_ENABLE=true
+# 元数据识别缓存过期时间，数字型，单位小时，0为系统默认（大内存模式为7天，滞则为3天），调大该值可减少themoviedb的访问次数
+META_CACHE_EXPIRE=0
+# 自动检查和更新站点资源包（索引、认证等）
+AUTO_UPDATE_RESOURCE=true
+# 【*】API密钥，建议更换复杂字符串，有Jellyseerr/Overseerr、媒体服务器Webhook等配置以及部分支持API_TOKEN的API中使用
+API_TOKEN=moviepilot
+# 登录页面电影海报，tmdb/bing，tmdb要求能正常连接api.themoviedb.org
+WALLPAPER=tmdb
+# TMDB图片地址，无需修改需保留默认值，如果默认地址连通性不好可以尝试修改为：`static-mdb.v.geilijiasu.com`
+TMDB_IMAGE_DOMAIN=image.tmdb.org
+# TMDB API地址，无需修改需保留默认值，也可配置为`api.tmdb.org`或其它中转代理服务地址，能连通即可
+TMDB_API_DOMAIN=api.themoviedb.org
+# 媒体识别来源 themoviedb/douban，使用themoviedb时需要确保能正常连接api.themoviedb.org，使用douban时不支持二级分类
+RECOGNIZE_SOURCE=themoviedb
+# Fanart开关
+FANART_ENABLE=true
+# 新增已入库媒体是否跟随TMDB信息变化，true/false，为false时即使TMDB信息变化时也会仍然按历史记录中已入库的信息进行刮削
+SCRAP_FOLLOW_TMDB=true
+# 刮削来源 themoviedb/douban，使用themoviedb时需要确保能正常连接api.themoviedb.org，使用douban时会缺失部分信息
+SCRAP_SOURCE=themoviedb
+# 电影重命名格式，Jinja2语法，参考：https://jinja.palletsprojects.com/en/3.0.x/templates/
+MOVIE_RENAME_FORMAT={{title}}{% if year %} ({{year}}){% endif %}/{{title}}{% if year %} ({{year}}){% endif %}{% if part %}-{{part}}{% endif %}{% if videoFormat %} - {{videoFormat}}{% endif %}{{fileExt}}
+# 电视剧重命名格式，Jinja2语法，参考：https://jinja.palletsprojects.com/en/3.0.x/templates/
+TV_RENAME_FORMAT={{title}}{% if year %} ({{year}}){% endif %}/Season {{season}}/{{title}} - {{season_episode}}{% if part %}-{{part}}{% endif %}{% if episode %} - 第 {{episode}} 集{% endif %}{{fileExt}}
+# 交互搜索自动下载用户ID（消息通知渠道的用户ID），使用,分割，设置为 all 代表所有用户自动择优下载，未设置需要用户手动选择资源或者回复`0`才自动择优下载
+AUTO_DOWNLOAD_USER=
+# 自动下载站点字幕（如有）
+DOWNLOAD_SUBTITLE=true
+# OCR服务器地址
+OCR_HOST=https://movie-pilot.org
+# 插件市场仓库地址，多个地址使用`,`分隔，保留最后的/
+PLUGIN_MARKET=https://github.com/jxxghp/MoviePilot-Plugins,https://github.com/thsrite/MoviePilot-Plugins,https://github.com/InfinityPacer/MoviePilot-Plugins,https://github.com/honue/MoviePilot-Plugins
+# 搜索多个名称，true/false，为true时搜索时会同时搜索中英文及原始名称，搜索结果会更全面，但会增加搜索时间；为false时其中一个名称搜索到结果或全部名称搜索完毕即停止
+SEARCH_MULTIPLE_NAME=true
+
+
+# 自定义配置
+AUTH_SITE="iyuu,hhclub,audiences,hddolby,zmpt,freefarm,hdfans,wintersakura,leaves,ptba,icc2022,xingtan,ptvicomo,agsvpt,hdkyl,qingwa,discfan,haidan,rousi"
--- a/apps/movie-pilot/1.9.17/scripts/init.sh
+++ b/apps/movie-pilot/1.9.17/scripts/init.sh
@ -7,8 +7,10 @@ if [ -f .env ]; then
  CURRENT_DIR=$(pwd)
  sed -i '/^ENV_FILE=/d' .env
  sed -i '/^GLOBAL_ENV_FILE=/d' .env
+  sed -i '/^APP_ENV_FILE=/d' .env
  echo "ENV_FILE=${CURRENT_DIR}/.env" >> .env
  echo "GLOBAL_ENV_FILE=${CURRENT_DIR}/envs/global.env" >> .env
+  echo "APP_ENV_FILE=${CURRENT_DIR}/envs/movie-pilot.env" >> .env

  echo "Check Finish."

--- a/apps/movie-pilot/1.9.17/scripts/upgrade.sh
+++ b/apps/movie-pilot/1.9.17/scripts/upgrade.sh
@ -7,8 +7,10 @@ if [ -f .env ]; then
  CURRENT_DIR=$(pwd)
  sed -i '/^ENV_FILE=/d' .env
  sed -i '/^GLOBAL_ENV_FILE=/d' .env
+  sed -i '/^APP_ENV_FILE=/d' .env
  echo "ENV_FILE=${CURRENT_DIR}/.env" >> .env
  echo "GLOBAL_ENV_FILE=${CURRENT_DIR}/envs/global.env" >> .env
+  echo "APP_ENV_FILE=${CURRENT_DIR}/envs/movie-pilot.env" >> .env

  echo "Check Finish."
 else
--- a/apps/movie-pilot/2.1.0/docker-compose.yml
+++ b/apps/movie-pilot/2.1.0/docker-compose.yml
@ -16,7 +16,7 @@ services:
      - ${PANEL_APP_PORT_API}:3001
    env_file:
      - ${GLOBAL_ENV_FILE:-/etc/1panel/envs/global.env}
-      - /etc/1panel/envs/movie-pilot/movie-pilot2.env
+      - ${APP_ENV_FILE:-/etc/1panel/envs/movie-pilot/movie-pilot2.env}
      - ${ENV_FILE:-/etc/1panel/envs/default.env}
    volumes:
      - /var/run/docker.sock:/var/run/docker.sock
--- a/apps/movie-pilot/2.1.0/envs/movie-pilot.env
+++ b/apps/movie-pilot/2.1.0/envs/movie-pilot.env
@ -0,0 +1,63 @@
+#######################################################################
+# 【*】为必配项，其余为选配项，选配项可以删除整项配置项或者保留配置默认值       #
+#######################################################################
+# 【*】API监听地址（注意不是前端访问地址）
+HOST=0.0.0.0
+# 是否调试模式，打开后将输出更多日志
+DEBUG=false
+# 是否开发模式，打开后后台服务将不会启动
+DEV=false
+# 日志级别（DEBUG、INFO、WARNING、ERROR等），当DEBUG=true时，此配置项将被忽略，日志级别始终为DEBUG
+LOG_LEVEL=INFO
+# 数据库连接池的大小，可适当降低如20-50以减少I/O压力
+DB_POOL_SIZE=100
+# 数据库连接池最大溢出连接数，可适当降低如0以减少I/O压力
+DB_MAX_OVERFLOW=500
+# SQLite 的 busy_timeout 参数，可适当增加如180以减少锁定错误
+DB_TIMEOUT=60
+# 【*】超级管理员，设置后一但重启将固化到数据库中，修改将无效（初始化超级管理员密码仅会生成一次，请在日志中查看并自行登录系统修改）
+SUPERUSER=admin
+# 辅助认证，允许通过外部服务进行认证、单点登录以及自动创建用户
+AUXILIARY_AUTH_ENABLE=false
+# 大内存模式，开启后会增加缓存数量，但会占用更多内存
+BIG_MEMORY_MODE=false
+# 是否启用DOH域名解析，启用后对于api.themovie.org等域名通过DOH解析，避免域名DNS被污染
+DOH_ENABLE=true
+# 使用 DOH 解析的域名列表，多个域名使用`,`分隔
+DOH_DOMAINS=api.themoviedb.org,api.tmdb.org,webservice.fanart.tv,api.github.com,github.com,raw.githubusercontent.com,api.telegram.org
+# DOH 解析服务器列表，多个服务器使用`,`分隔
+DOH_RESOLVERS=1.0.0.1,1.1.1.1,9.9.9.9,149.112.112.112
+# 元数据识别缓存过期时间，数字型，单位小时，0为系统默认（大内存模式为7天，滞则为3天），调大该值可减少themoviedb的访问次数
+META_CACHE_EXPIRE=0
+# 自动检查和更新站点资源包（索引、认证等）
+AUTO_UPDATE_RESOURCE=true
+# 【*】API密钥，未设置时系统将随机生成，建议使用复杂字符串，用于Jellyseerr/Overseerr、媒体服务器Webhook等配置以及部分支持API_TOKEN的API请求
+API_TOKEN=''
+# 登录页面电影海报，tmdb/bing/mediaserver，tmdb要求能正常连接api.themoviedb.org
+WALLPAPER=tmdb
+# TMDB图片地址，无需修改需保留默认值，如果默认地址连通性不好可以尝试修改为：`static-mdb.v.geilijiasu.com`
+TMDB_IMAGE_DOMAIN=image.tmdb.org
+# TMDB API地址，无需修改需保留默认值，也可配置为`api.tmdb.org`或其它中转代理服务地址，能连通即可
+TMDB_API_DOMAIN=api.themoviedb.org
+# 媒体识别来源 themoviedb/douban，使用themoviedb时需要确保能正常连接api.themoviedb.org，使用douban时不支持二级分类
+RECOGNIZE_SOURCE=themoviedb
+# Fanart开关
+FANART_ENABLE=true
+# 新增已入库媒体是否跟随TMDB信息变化，true/false，为false时即使TMDB信息变化时也会仍然按历史记录中已入库的信息进行刮削
+SCRAP_FOLLOW_TMDB=true
+# 刮削来源 themoviedb/douban，使用themoviedb时需要确保能正常连接api.themoviedb.org，使用douban时会缺失部分信息
+SCRAP_SOURCE=themoviedb
+# 电影重命名格式，Jinja2语法，参考：https://jinja.palletsprojects.com/en/3.0.x/templates/
+MOVIE_RENAME_FORMAT={{title}}{% if year %} ({{year}}){% endif %}/{{title}}{% if year %} ({{year}}){% endif %}{% if part %}-{{part}}{% endif %}{% if videoFormat %} - {{videoFormat}}{% endif %}{{fileExt}}
+# 电视剧重命名格式，Jinja2语法，参考：https://jinja.palletsprojects.com/en/3.0.x/templates/
+TV_RENAME_FORMAT={{title}}{% if year %} ({{year}}){% endif %}/Season {{season}}/{{title}} - {{season_episode}}{% if part %}-{{part}}{% endif %}{% if episode %} - 第 {{episode}} 集{% endif %}{{fileExt}}
+# 交互搜索自动下载用户ID（消息通知渠道的用户ID），使用,分割，设置为 all 代表所有用户自动择优下载，未设置需要用户手动选择资源或者回复`0`才自动择优下载
+AUTO_DOWNLOAD_USER=
+# 自动下载站点字幕（如有）
+DOWNLOAD_SUBTITLE=true
+# OCR服务器地址
+OCR_HOST=https://movie-pilot.org
+# 插件市场仓库地址，多个地址使用`,`分隔，保留最后的/
+PLUGIN_MARKET=https://github.com/jxxghp/MoviePilot-Plugins,https://github.com/thsrite/MoviePilot-Plugins,https://github.com/InfinityPacer/MoviePilot-Plugins,https://github.com/honue/MoviePilot-Plugins
+# 搜索多个名称，true/false，为true时搜索时会同时搜索中英文及原始名称，搜索结果会更全面，但会增加搜索时间；为false时其中一个名称搜索到结果或全部名称搜索完毕即停止
+SEARCH_MULTIPLE_NAME=true
--- a/apps/movie-pilot/2.1.0/scripts/init.sh
+++ b/apps/movie-pilot/2.1.0/scripts/init.sh
@ -7,8 +7,10 @@ if [ -f .env ]; then
  CURRENT_DIR=$(pwd)
  sed -i '/^ENV_FILE=/d' .env
  sed -i '/^GLOBAL_ENV_FILE=/d' .env
+  sed -i '/^APP_ENV_FILE=/d' .env
  echo "ENV_FILE=${CURRENT_DIR}/.env" >> .env
  echo "GLOBAL_ENV_FILE=${CURRENT_DIR}/envs/global.env" >> .env
+  echo "APP_ENV_FILE=${CURRENT_DIR}/envs/movie-pilot.env" >> .env

  echo "Check Finish."

--- a/apps/movie-pilot/2.1.0/scripts/upgrade.sh
+++ b/apps/movie-pilot/2.1.0/scripts/upgrade.sh
@ -7,8 +7,10 @@ if [ -f .env ]; then
  CURRENT_DIR=$(pwd)
  sed -i '/^ENV_FILE=/d' .env
  sed -i '/^GLOBAL_ENV_FILE=/d' .env
+  sed -i '/^APP_ENV_FILE=/d' .env
  echo "ENV_FILE=${CURRENT_DIR}/.env" >> .env
  echo "GLOBAL_ENV_FILE=${CURRENT_DIR}/envs/global.env" >> .env
+  echo "APP_ENV_FILE=${CURRENT_DIR}/envs/movie-pilot.env" >> .env

  echo "Check Finish."
 else
--- a/apps/nexusphp/1.8.16/envs/nexusphp.env
+++ b/apps/nexusphp/1.8.16/envs/nexusphp.env
@ -0,0 +1,94 @@
+APP_NAME=NexusPHP
+APP_ENV=local
+APP_KEY=base64:WUbN2wa2kl3E1VDW4iKaH3RBHw3hKY7BK0hWEkBZmGg=
+APP_DEBUG=true
+APP_URL=http://localhost
+
+LOG_CHANNEL=stack
+LOG_LEVEL=debug
+
+DB_CONNECTION=mysql
+DB_HOST=127.0.0.1
+DB_PORT=3306
+DB_DATABASE=nexusphp
+DB_USERNAME=root
+DB_PASSWORD=
+
+BROADCAST_DRIVER=log
+CACHE_DRIVER=redis
+QUEUE_CONNECTION=redis
+SESSION_DRIVER=file
+SESSION_LIFETIME=120
+
+MEMCACHED_HOST=127.0.0.1
+
+MAIL_MAILER=smtp
+MAIL_HOST=mailhog
+MAIL_PORT=1025
+MAIL_USERNAME=null
+MAIL_PASSWORD=null
+MAIL_ENCRYPTION=null
+MAIL_FROM_ADDRESS=null
+MAIL_FROM_NAME="${APP_NAME}"
+
+AWS_ACCESS_KEY_ID=
+AWS_SECRET_ACCESS_KEY=
+AWS_DEFAULT_REGION=us-east-1
+AWS_BUCKET=
+
+PUSHER_APP_ID=
+PUSHER_APP_KEY=
+PUSHER_APP_SECRET=
+PUSHER_APP_CLUSTER=mt1
+
+MIX_PUSHER_APP_KEY="${PUSHER_APP_KEY}"
+MIX_PUSHER_APP_CLUSTER="${PUSHER_APP_CLUSTER}"
+
+
+REDIS_HOST=127.0.0.1
+REDIS_PASSWORD=
+REDIS_PORT=6379
+REDIS_DB=0
+
+USE_CRON_TRIGGER_CLEANUP=true
+
+LOG_FILE=/tmp/nexus.log
+
+TIMEZONE=Asia/Shanghai
+
+GOOGLE_DRIVE_CLIENT_ID=
+GOOGLE_DRIVE_CLIENT_SECRET=
+GOOGLE_DRIVE_REFRESH_TOKEN=
+GOOGLE_DRIVE_FOLDER_ID=
+
+GEOIP2_DATABASE=/var/www/html/geoip2/geoip2.mmdb
+
+ELASTICSEARCH_HOST=
+ELASTICSEARCH_PORT=
+ELASTICSEARCH_SCHEME=
+ELASTICSEARCH_USER=
+ELASTICSEARCH_PASS=
+ELASTICSEARCH_SSL_VERIFICATION
+ELASTICSEARCH_ENABLED=
+
+SFTP_HOST=
+SFTP_USERNAME=
+SFTP_PASSWORD=
+SFTP_PORT=
+SFTP_ROOT=/tmp
+
+UID_STARTS=10001
+
+PHP_PATH=
+NAS_TOOLS_KEY=
+IYUU_SECRET=
+
+MEILISEARCH_SCHEME=http
+MEILISEARCH_HOST=127.0.0.1
+MEILISEARCH_PORT=7700
+MEILISEARCH_MASTER_KEY=
+
+CACHE_KEY_AGENT_ALLOW=all_agent_allows
+CACHE_KEY_AGENT_DENY=all_agent_denies
+CHANNEL_NAME_SETTING=channel_setting
+CHANNEL_NAME_MODEL_EVENT=channel_model_event
--- a/apps/nexusphp/1.8.16/scripts/init.sh
+++ b/apps/nexusphp/1.8.16/scripts/init.sh
@ -26,7 +26,7 @@ if [ -f .env ]; then
  mkdir -p "$CONFIG_DIR"

  CONFIG_FILE="$CONFIG_DIR/.env.example"
-  cp /etc/1panel/envs/nexusphp/nexusphp.env $CONFIG_FILE
+  cp ./envs/nexusphp.env $CONFIG_FILE
  sed -i "s/APP_KEY=.*/APP_KEY=$APP_KEY/" $CONFIG_FILE

  echo "Check Finish."
--- a/apps/onedev/11.5.3/docker-compose.yml
+++ b/apps/onedev/11.5.3/docker-compose.yml
@ -19,7 +19,7 @@ services:
      - /var/run/docker.sock:/var/run/docker.sock
    env_file:
      - ${GLOBAL_ENV_FILE:-/etc/1panel/envs/global.env}
-      - /etc/1panel/envs/onedev/onedev.env
+      - ${APP_ENV_FILE:-/etc/1panel/envs/onedev/onedev.env}
      - ${ENV_FILE:-/etc/1panel/envs/default.env}
    environment:
      - initial_user=${INITIAL_USER}
--- a/apps/onedev/11.5.3/envs/onedev.env
+++ b/apps/onedev/11.5.3/envs/onedev.env
@ -0,0 +1,29 @@
+# 外部数据库支持配置
+
+# PostgreSQL
+# hibernate_dialect=io.onedev.server.persistence.PostgreSQLDialect
+# hibernate_connection_driver_class=org.postgresql.Driver
+# hibernate_connection_url=jdbc:postgresql://localhost:5432/onedev
+# hibernate_connection_username=postgres
+# hibernate_connection_password=postgres
+
+# MySQL
+# hibernate_dialect=org.hibernate.dialect.MySQL5InnoDBDialect
+# hibernate_connection_driver_class=com.mysql.cj.jdbc.Driver
+# hibernate_connection_url=jdbc:mysql://localhost:3306/onedev?serverTimezone=UTC&allowPublicKeyRetrieval=true&useSSL=false&disableMariaDbDriver=true
+# hibernate_connection_username=root
+# hibernate_connection_password=root
+
+# MariaDB
+# hibernate_dialect=org.hibernate.dialect.MySQL5InnoDBDialect
+# hibernate_connection_driver_class=org.mariadb.jdbc.Driver
+# hibernate_connection_url=jdbc:mariadb://localhost:3306/onedev
+# hibernate_connection_username=root
+# hibernate_connection_password=root
+
+# MS SQL Server
+# hibernate_dialect=org.hibernate.dialect.SQLServer2012Dialect
+# hibernate_connection_driver_class=com.microsoft.sqlserver.jdbc.SQLServerDriver
+# hibernate_connection_url=jdbc:sqlserver://localhost:1433;databaseName=onedev
+# hibernate_connection_username=sa
+# hibernate_connection_password=sa
--- a/apps/onedev/11.5.3/scripts/init.sh
+++ b/apps/onedev/11.5.3/scripts/init.sh
@ -7,8 +7,10 @@ if [ -f .env ]; then
  CURRENT_DIR=$(pwd)
  sed -i '/^ENV_FILE=/d' .env
  sed -i '/^GLOBAL_ENV_FILE=/d' .env
+  sed -i '/^APP_ENV_FILE=/d' .env
  echo "ENV_FILE=${CURRENT_DIR}/.env" >> .env
  echo "GLOBAL_ENV_FILE=${CURRENT_DIR}/envs/global.env" >> .env
+  echo "APP_ENV_FILE=${CURRENT_DIR}/envs/onedev.env" >> .env

  echo "Check Finish."

--- a/apps/onedev/11.5.3/scripts/upgrade.sh
+++ b/apps/onedev/11.5.3/scripts/upgrade.sh
@ -7,8 +7,10 @@ if [ -f .env ]; then
  CURRENT_DIR=$(pwd)
  sed -i '/^ENV_FILE=/d' .env
  sed -i '/^GLOBAL_ENV_FILE=/d' .env
+  sed -i '/^APP_ENV_FILE=/d' .env
  echo "ENV_FILE=${CURRENT_DIR}/.env" >> .env
  echo "GLOBAL_ENV_FILE=${CURRENT_DIR}/envs/global.env" >> .env
+  echo "APP_ENV_FILE=${CURRENT_DIR}/envs/onedev.env" >> .env

  echo "Check Finish."

--- a/apps/outline/0.81.1/docker-compose.yml
+++ b/apps/outline/0.81.1/docker-compose.yml
@ -17,7 +17,7 @@ services:
      - ${OUTLINE_ROOT_PATH}/data:/var/lib/outline/data
    env_file:
      - ${GLOBAL_ENV_FILE:-/etc/1panel/envs/global.env}
-      - /etc/1panel/envs/outline/outline.env
+      - ${APP_ENV_FILE:-/etc/1panel/envs/outline/outline.env}
      - ${ENV_FILE:-/etc/1panel/envs/default.env}
    environment:
      - DATABASE_URL=postgres://${DB_USERNAME}:${DB_PASSWORD}@${DB_HOSTNAME}:${DB_PORT}/${DB_DATABASE_NAME}
--- a/apps/outline/0.81.1/envs/outline.env
+++ b/apps/outline/0.81.1/envs/outline.env
@ -0,0 +1,224 @@
+# –––––––––––––––– REQUIRED ––––––––––––––––
+
+NODE_ENV=production
+
+# Generate a hex-encoded 32-byte random key. You should use `openssl rand -hex 32`
+# in your terminal to generate a random value.
+SECRET_KEY=generate_a_new_key
+
+# Generate a unique random key. The format is not important but you could still use
+# `openssl rand -hex 32` in your terminal to produce this.
+UTILS_SECRET=generate_a_new_key
+
+# For production point these at your databases, in development the default
+# should work out of the box.
+DATABASE_URL=postgres://user:pass@localhost:5432/outline
+DATABASE_CONNECTION_POOL_MIN=
+DATABASE_CONNECTION_POOL_MAX=
+# Uncomment this to disable SSL for connecting to Postgres
+PGSSLMODE=disable
+
+# For redis you can either specify an ioredis compatible url like this
+REDIS_URL=redis://localhost:6379
+# or alternatively, if you would like to provide additional connection options,
+# use a base64 encoded JSON connection option object. Refer to the ioredis documentation
+# for a list of available options.
+# Example: Use Redis Sentinel for high availability
+# {"sentinels":[{"host":"sentinel-0","port":26379},{"host":"sentinel-1","port":26379}],"name":"mymaster"}
+# REDIS_URL=ioredis://eyJzZW50aW5lbHMiOlt7Imhvc3QiOiJzZW50aW5lbC0wIiwicG9ydCI6MjYzNzl9LHsiaG9zdCI6InNlbnRpbmVsLTEiLCJwb3J0IjoyNjM3OX1dLCJuYW1lIjoibXltYXN0ZXIifQ==
+
+# URL should point to the fully qualified, publicly accessible URL. If using a
+# proxy the port in URL and PORT may be different.
+URL=http://127.0.0.1:3000
+PORT=3000
+
+# See [documentation](docs/SERVICES.md) on running a separate collaboration
+# server, for normal operation this does not need to be set.
+COLLABORATION_URL=
+
+# Specify what storage system to use. Possible value is one of "s3" or "local".
+# For "local", the avatar images and document attachments will be saved on local disk.
+FILE_STORAGE=local
+
+# If "local" is configured for FILE_STORAGE above, then this sets the parent directory under
+# which all attachments/images go. Make sure that the process has permissions to create
+# this path and also to write files to it.
+FILE_STORAGE_LOCAL_ROOT_DIR=/var/lib/outline/data
+
+# Maximum allowed size for the uploaded attachment.
+FILE_STORAGE_UPLOAD_MAX_SIZE=262144000
+
+# Override the maximum size of document imports, generally this should be lower
+# than the document attachment maximum size.
+FILE_STORAGE_IMPORT_MAX_SIZE=
+
+# Override the maximum size of workspace imports, these can be especially large
+# and the files are temporary being automatically deleted after a period of time.
+FILE_STORAGE_WORKSPACE_IMPORT_MAX_SIZE=
+
+# To support uploading of images for avatars and document attachments in a distributed
+# architecture an s3-compatible storage can be configured if FILE_STORAGE=s3 above.
+AWS_ACCESS_KEY_ID=get_a_key_from_aws
+AWS_SECRET_ACCESS_KEY=get_the_secret_of_above_key
+AWS_REGION=xx-xxxx-x
+AWS_S3_ACCELERATE_URL=
+AWS_S3_UPLOAD_BUCKET_URL=http://s3:4569
+AWS_S3_UPLOAD_BUCKET_NAME=bucket_name_here
+AWS_S3_FORCE_PATH_STYLE=true
+AWS_S3_ACL=private
+
+# –––––––––––––– AUTHENTICATION ––––––––––––––
+
+# Third party signin credentials, at least ONE OF EITHER Google, Slack,
+# or Microsoft is required for a working installation or you'll have no sign-in
+# options.
+
+# To configure Slack auth, you'll need to create an Application at
+# => https://api.slack.com/apps
+#
+# When configuring the Client ID, add a redirect URL under "OAuth & Permissions":
+# https://<URL>/auth/slack.callback
+SLACK_CLIENT_ID=get_a_key_from_slack
+SLACK_CLIENT_SECRET=get_the_secret_of_above_key
+
+# To configure Google auth, you'll need to create an OAuth Client ID at
+# => https://console.cloud.google.com/apis/credentials
+#
+# When configuring the Client ID, add an Authorized redirect URI:
+# https://<URL>/auth/google.callback
+GOOGLE_CLIENT_ID=
+GOOGLE_CLIENT_SECRET=
+
+# To configure Microsoft/Azure auth, you'll need to create an OAuth Client. See
+# the guide for details on setting up your Azure App:
+# => https://wiki.generaloutline.com/share/dfa77e56-d4d2-4b51-8ff8-84ea6608faa4
+AZURE_CLIENT_ID=
+AZURE_CLIENT_SECRET=
+AZURE_RESOURCE_APP_ID=
+
+# To configure generic OIDC auth, you'll need some kind of identity provider.
+# See documentation for whichever IdP you use to acquire the following info:
+# Redirect URI is https://<URL>/auth/oidc.callback
+OIDC_CLIENT_ID=
+OIDC_CLIENT_SECRET=
+OIDC_AUTH_URI=
+OIDC_TOKEN_URI=
+OIDC_USERINFO_URI=
+OIDC_LOGOUT_URI=
+
+# Specify which claims to derive user information from
+# Supports any valid JSON path with the JWT payload
+OIDC_USERNAME_CLAIM=preferred_username
+
+# Display name for OIDC authentication
+OIDC_DISPLAY_NAME=OpenID Connect
+
+# Space separated auth scopes.
+OIDC_SCOPES=openid profile email
+
+# To configure the GitHub integration, you'll need to create a GitHub App at
+# => https://github.com/settings/apps
+#
+# When configuring the Client ID, add a redirect URL under "Permissions & events":
+# https://<URL>/api/github.callback
+GITHUB_CLIENT_ID=
+GITHUB_CLIENT_SECRET=
+GITHUB_APP_NAME=
+GITHUB_APP_ID=
+GITHUB_APP_PRIVATE_KEY=
+
+# To configure Discord auth, you'll need to create a Discord Application at
+# => https://discord.com/developers/applications/
+#
+# When configuring the Client ID, add a redirect URL under "OAuth2":
+# https://<URL>/auth/discord.callback
+DISCORD_CLIENT_ID=
+DISCORD_CLIENT_SECRET=
+
+# DISCORD_SERVER_ID should be the ID of the Discord server that Outline is
+# integrated with.
+# Used to verify that the user is a member of the server as well as server
+# metadata such as nicknames, server icon and name.
+DISCORD_SERVER_ID=
+
+# DISCORD_SERVER_ROLES should be a comma separated list of role IDs that are
+# allowed to access Outline. If this is not set, all members of the server
+# will be allowed to access Outline.
+# DISCORD_SERVER_ID and DISCORD_SERVER_ROLES must be set together.
+DISCORD_SERVER_ROLES=
+
+# –––––––––––––––– OPTIONAL ––––––––––––––––
+
+# Base64 encoded private key and certificate for HTTPS termination. This is only
+# required if you do not use an external reverse proxy. See documentation:
+# https://wiki.generaloutline.com/share/1c922644-40d8-41fe-98f9-df2b67239d45
+SSL_KEY=
+SSL_CERT=
+
+# If using a Cloudfront/Cloudflare distribution or similar it can be set below.
+# This will cause paths to javascript, stylesheets, and images to be updated to
+# the hostname defined in CDN_URL. In your CDN configuration the origin server
+# should be set to the same as URL.
+CDN_URL=
+
+# Auto-redirect to https in production. The default is true but you may set to
+# false if you can be sure that SSL is terminated at an external loadbalancer.
+FORCE_HTTPS=false
+
+# Have the installation check for updates by sending anonymized statistics to
+# the maintainers
+ENABLE_UPDATES=true
+
+# How many processes should be spawned. As a reasonable rule divide your servers
+# available memory by 512 for a rough estimate
+WEB_CONCURRENCY=1
+
+# You can remove this line if your reverse proxy already logs incoming http
+# requests and this ends up being duplicative
+DEBUG=http
+
+# Configure lowest severity level for server logs. Should be one of
+# error, warn, info, http, verbose, debug and silly
+LOG_LEVEL=info
+
+# For a complete Slack integration with search and posting to channels the
+# following configs are also needed, some more details
+# => https://wiki.generaloutline.com/share/be25efd1-b3ef-4450-b8e5-c4a4fc11e02a
+#
+SLACK_VERIFICATION_TOKEN=your_token
+SLACK_APP_ID=A0XXXXXXX
+SLACK_MESSAGE_ACTIONS=true
+
+# Optionally enable Sentry (sentry.io) to track errors and performance,
+# and optionally add a Sentry proxy tunnel for bypassing ad blockers in the UI:
+# https://docs.sentry.io/platforms/javascript/troubleshooting/#using-the-tunnel-option)
+SENTRY_DSN=
+SENTRY_TUNNEL=
+
+# To support sending outgoing transactional emails such as "document updated" or
+# "you've been invited" you'll need to provide authentication for an SMTP server
+SMTP_HOST=
+SMTP_PORT=
+SMTP_USERNAME=
+SMTP_PASSWORD=
+SMTP_FROM_EMAIL=
+SMTP_REPLY_EMAIL=
+SMTP_TLS_CIPHERS=
+SMTP_SECURE=true
+
+# The default interface language. See translate.getoutline.com for a list of
+# available language codes and their rough percentage translated.
+DEFAULT_LANGUAGE=zh_CN
+
+# Optionally enable rate limiter at application web server
+RATE_LIMITER_ENABLED=true
+
+# Configure default throttling parameters for rate limiter
+RATE_LIMITER_REQUESTS=1000
+RATE_LIMITER_DURATION_WINDOW=60
+
+# Iframely API config
+# https://iframe.ly/api/oembed
+# https://iframe.ly/api/iframely
+IFRAMELY_URL=https://iframe.ly/api/iframely
+# IFRAMELY_API_KEY=
--- a/apps/outline/0.81.1/scripts/init.sh
+++ b/apps/outline/0.81.1/scripts/init.sh
@ -7,8 +7,10 @@ if [ -f .env ]; then
  CURRENT_DIR=$(pwd)
  sed -i '/^ENV_FILE=/d' .env
  sed -i '/^GLOBAL_ENV_FILE=/d' .env
+  sed -i '/^APP_ENV_FILE=/d' .env
  echo "ENV_FILE=${CURRENT_DIR}/.env" >> .env
  echo "GLOBAL_ENV_FILE=${CURRENT_DIR}/envs/global.env" >> .env
+  echo "APP_ENV_FILE=${CURRENT_DIR}/envs/outline.env" >> .env

  # setup-2 remove empty values
  sed -i '/^.*=""/d' .env
--- a/apps/outline/0.81.1/scripts/upgrade.sh
+++ b/apps/outline/0.81.1/scripts/upgrade.sh
@ -7,8 +7,10 @@ if [ -f .env ]; then
  CURRENT_DIR=$(pwd)
  sed -i '/^ENV_FILE=/d' .env
  sed -i '/^GLOBAL_ENV_FILE=/d' .env
+  sed -i '/^APP_ENV_FILE=/d' .env
  echo "ENV_FILE=${CURRENT_DIR}/.env" >> .env
  echo "GLOBAL_ENV_FILE=${CURRENT_DIR}/envs/global.env" >> .env
+  echo "APP_ENV_FILE=${CURRENT_DIR}/envs/outline.env" >> .env

  chmod 777 -R "$OUTLINE_ROOT_PATH"

--- a/apps/photoprism/240915/docker-compose.yml
+++ b/apps/photoprism/240915/docker-compose.yml
@ -30,7 +30,7 @@ services:
      # - /dev/video11:/dev/video11
    env_file:
      - ${GLOBAL_ENV_FILE:-/etc/1panel/envs/global.env}
-      - /etc/1panel/envs/photoprism/photoprism.env
+      - ${APP_ENV_FILE:-/etc/1panel/envs/photoprism/photoprism.env}
      - ${ENV_FILE:-/etc/1panel/envs/default.env}
    volumes:
      - ${PHOTOPRISM_ROOT_PATH}/originals:/photoprism/originals
--- a/apps/photoprism/240915/envs/photoprism.env
+++ b/apps/photoprism/240915/envs/photoprism.env
@ -0,0 +1,25 @@
+PHOTOPRISM_DISABLE_TLS="false"
+PHOTOPRISM_DEFAULT_TLS="true"
+PHOTOPRISM_HTTP_COMPRESSION="gzip"
+PHOTOPRISM_LOG_LEVEL="info"
+PHOTOPRISM_READONLY="false"
+PHOTOPRISM_EXPERIMENTAL="false"
+PHOTOPRISM_DISABLE_CHOWN="false"
+PHOTOPRISM_DISABLE_WEBDAV="false"
+PHOTOPRISM_DISABLE_SETTINGS="false"
+PHOTOPRISM_DISABLE_TENSORFLOW="false"
+PHOTOPRISM_DISABLE_FACES="false"
+PHOTOPRISM_DISABLE_CLASSIFICATION="false"
+PHOTOPRISM_DISABLE_VECTORS="false"
+PHOTOPRISM_DISABLE_RAW="false"
+PHOTOPRISM_RAW_PRESETS="false"
+PHOTOPRISM_SIDECAR_YAML="true"
+PHOTOPRISM_BACKUP_ALBUMS="true"
+PHOTOPRISM_BACKUP_DATABASE="true"
+PHOTOPRISM_BACKUP_SCHEDULE="daily"
+PHOTOPRISM_INDEX_SCHEDULE=""
+PHOTOPRISM_AUTO_INDEX=300
+PHOTOPRISM_AUTO_IMPORT=-1
+PHOTOPRISM_DETECT_NSFW="false"
+PHOTOPRISM_UPLOAD_NSFW="true"
+PHOTOPRISM_INIT="https gpu ffmpeg tensorflow"
--- a/apps/photoprism/240915/scripts/init.sh
+++ b/apps/photoprism/240915/scripts/init.sh
@ -7,8 +7,10 @@ if [ -f .env ]; then
  CURRENT_DIR=$(pwd)
  sed -i '/^ENV_FILE=/d' .env
  sed -i '/^GLOBAL_ENV_FILE=/d' .env
+  sed -i '/^APP_ENV_FILE=/d' .env
  echo "ENV_FILE=${CURRENT_DIR}/.env" >> .env
  echo "GLOBAL_ENV_FILE=${CURRENT_DIR}/envs/global.env" >> .env
+  echo "APP_ENV_FILE=${CURRENT_DIR}/envs/photoprism.env" >> .env

  echo "Check Finish."

--- a/apps/photoprism/240915/scripts/upgrade.sh
+++ b/apps/photoprism/240915/scripts/upgrade.sh
@ -7,8 +7,10 @@ if [ -f .env ]; then
  CURRENT_DIR=$(pwd)
  sed -i '/^ENV_FILE=/d' .env
  sed -i '/^GLOBAL_ENV_FILE=/d' .env
+  sed -i '/^APP_ENV_FILE=/d' .env
  echo "ENV_FILE=${CURRENT_DIR}/.env" >> .env
  echo "GLOBAL_ENV_FILE=${CURRENT_DIR}/envs/global.env" >> .env
+  echo "APP_ENV_FILE=${CURRENT_DIR}/envs/photoprism.env" >> .env

  echo "Check Finish."