diff --git a/apps/frpc/0.52.1/data/frpc.ini b/apps/frpc/0.52.1/data/frpc.ini
deleted file mode 100644
index 13a8e5f6..00000000
--- a/apps/frpc/0.52.1/data/frpc.ini
+++ /dev/null
@@ -1,9 +0,0 @@
-[common]
-server_addr = 127.0.0.1
-server_port = 7000
-
-[ssh]
-type = tcp
-local_ip = 127.0.0.1
-local_port = 22
-remote_port = 6000
diff --git a/apps/frpc/0.52.1/data/frpc.toml b/apps/frpc/0.52.1/data/frpc.toml
new file mode 100644
index 00000000..366bd33c
--- /dev/null
+++ b/apps/frpc/0.52.1/data/frpc.toml
@@ -0,0 +1,9 @@
+serverAddr = "0.0.0.0"
+serverPort = 7000
+
+[[proxies]]
+name = "ssh"
+type = "tcp"
+localIP = "127.0.0.1"
+localPort = 22
+remotePort = 6001
diff --git a/apps/frpc/0.52.1/data/frpc_full.ini b/apps/frpc/0.52.1/data/frpc_full.ini
deleted file mode 100644
index 29f6bcab..00000000
--- a/apps/frpc/0.52.1/data/frpc_full.ini
+++ /dev/null
@@ -1,365 +0,0 @@
-# [common] is integral section
-[common]
-# A literal address or host name for IPv6 must be enclosed
-# in square brackets, as in "[::1]:80", "[ipv6-host]:http" or "[ipv6-host%zone]:80"
-# For single "server_addr" field, no need square brackets, like "server_addr = ::".
-server_addr = 0.0.0.0
-server_port = 7000
-
-# The maximum amount of time a dial to server will wait for a connect to complete. Default value is 10 seconds.
-# dial_server_timeout = 10
-
-# dial_server_keepalive specifies the interval between keep-alive probes for an active network connection between frpc and frps.
-# If negative, keep-alive probes are disabled.
-# dial_server_keepalive = 7200
-
-# if you want to connect frps by http proxy or socks5 proxy or ntlm proxy, you can set http_proxy here or in global environment variables
-# it only works when protocol is tcp
-# http_proxy = http://user:passwd@192.168.1.128:8080
-# http_proxy = socks5://user:passwd@192.168.1.128:1080
-# http_proxy = ntlm://user:passwd@192.168.1.128:2080
-
-# console or real logFile path like ./frpc.log
-log_file = ./frpc.log
-
-# trace, debug, info, warn, error
-log_level = info
-
-log_max_days = 3
-
-# disable log colors when log_file is console, default is false
-disable_log_color = false
-
-# for authentication, should be same as your frps.ini
-# authenticate_heartbeats specifies whether to include authentication token in heartbeats sent to frps. By default, this value is false.
-authenticate_heartbeats = false
-
-# authenticate_new_work_conns specifies whether to include authentication token in new work connections sent to frps. By default, this value is false.
-authenticate_new_work_conns = false
-
-# auth token
-token = 12345678
-
-authentication_method = 
-
-# oidc_client_id specifies the client ID to use to get a token in OIDC authentication if AuthenticationMethod == "oidc".
-# By default, this value is "".
-oidc_client_id =
-
-# oidc_client_secret specifies the client secret to use to get a token in OIDC authentication if AuthenticationMethod == "oidc".
-# By default, this value is "".
-oidc_client_secret =
-
-# oidc_audience specifies the audience of the token in OIDC authentication if AuthenticationMethod == "oidc". By default, this value is "".
-oidc_audience =
-
-# oidc_scope specifies the permisssions of the token in OIDC authentication if AuthenticationMethod == "oidc". By default, this value is "".
-oidc_scope =
-
-# oidc_token_endpoint_url specifies the URL which implements OIDC Token Endpoint.
-# It will be used to get an OIDC token if AuthenticationMethod == "oidc". By default, this value is "".
-oidc_token_endpoint_url =
-
-# oidc_additional_xxx specifies additional parameters to be sent to the OIDC Token Endpoint.
-# For example, if you want to specify the "audience" parameter, you can set as follow.
-# frp will add "audience=<value>" "var1=<value>" to the additional parameters.
-# oidc_additional_audience = https://dev.auth.com/api/v2/
-# oidc_additional_var1 = foobar
-
-# set admin address for control frpc's action by http api such as reload
-admin_addr = 127.0.0.1
-admin_port = 7400
-admin_user = admin
-admin_pwd = admin
-# Admin assets directory. By default, these assets are bundled with frpc.
-# assets_dir = ./static
-
-# connections will be established in advance, default value is zero
-pool_count = 5
-
-# if tcp stream multiplexing is used, default is true, it must be same with frps
-# tcp_mux = true
-
-# specify keep alive interval for tcp mux.
-# only valid if tcp_mux is true.
-# tcp_mux_keepalive_interval = 60
-
-# your proxy name will be changed to {user}.{proxy}
-user = your_name
-
-# decide if exit program when first login failed, otherwise continuous relogin to frps
-# default is true
-login_fail_exit = true
-
-# communication protocol used to connect to server
-# supports tcp, kcp, quic and websocket now, default is tcp
-protocol = tcp
-
-# set client binding ip when connect server, default is empty.
-# only when protocol = tcp or websocket, the value will be used.
-connect_server_local_ip = 0.0.0.0
-
-# quic protocol options
-# quic_keepalive_period = 10
-# quic_max_idle_timeout = 30
-# quic_max_incoming_streams = 100000
-
-# if tls_enable is true, frpc will connect frps by tls
-tls_enable = true
-
-# tls_cert_file = client.crt
-# tls_key_file = client.key
-# tls_trusted_ca_file = ca.crt
-# tls_server_name = example.com
-
-# specify a dns server, so frpc will use this instead of default one
-# dns_server = 8.8.8.8
-
-# proxy names you want to start separated by ','
-# default is empty, means all proxies
-# start = ssh,dns
-
-# heartbeat configure, it's not recommended to modify the default value
-# The default value of heartbeat_interval is 10 and heartbeat_timeout is 90. Set negative value
-# to disable it.
-# heartbeat_interval = 30
-# heartbeat_timeout = 90
-
-# additional meta info for client
-meta_var1 = 123
-meta_var2 = 234
-
-# specify udp packet size, unit is byte. If not set, the default value is 1500.
-# This parameter should be same between client and server.
-# It affects the udp and sudp proxy.
-udp_packet_size = 1500
-
-# include other config files for proxies.
-# includes = ./confd/*.ini
-
-# By default, frpc will connect frps with first custom byte if tls is enabled.
-# If DisableCustomTLSFirstByte is true, frpc will not send that custom byte.
-disable_custom_tls_first_byte = false
-
-# Enable golang pprof handlers in admin listener.
-# Admin port must be set first.
-pprof_enable = false
-
-# 'ssh' is the unique proxy name
-# if user in [common] section is not empty, it will be changed to {user}.{proxy} such as 'your_name.ssh'
-[ssh]
-# tcp | udp | http | https | stcp | xtcp, default is tcp
-type = tcp
-local_ip = 127.0.0.1
-local_port = 22
-# limit bandwidth for this proxy, unit is KB and MB
-bandwidth_limit = 1MB
-# where to limit bandwidth, can be 'client' or 'server', default is 'client'
-bandwidth_limit_mode = client
-# true or false, if true, messages between frps and frpc will be encrypted, default is false
-use_encryption = false
-# if true, message will be compressed
-use_compression = false
-# remote port listen by frps
-remote_port = 6001
-# frps will load balancing connections for proxies in same group
-group = test_group
-# group should have same group key
-group_key = 123456
-# enable health check for the backend service, it support 'tcp' and 'http' now
-# frpc will connect local service's port to detect it's healthy status
-health_check_type = tcp
-# health check connection timeout
-health_check_timeout_s = 3
-# if continuous failed in 3 times, the proxy will be removed from frps
-health_check_max_failed = 3
-# every 10 seconds will do a health check
-health_check_interval_s = 10
-# additional meta info for each proxy
-meta_var1 = 123
-meta_var2 = 234
-
-[ssh_random]
-type = tcp
-local_ip = 127.0.0.1
-local_port = 22
-# if remote_port is 0, frps will assign a random port for you
-remote_port = 0
-
-# if you want to expose multiple ports, add 'range:' prefix to the section name
-# frpc will generate multiple proxies such as 'tcp_port_6010', 'tcp_port_6011' and so on.
-[range:tcp_port]
-type = tcp
-local_ip = 127.0.0.1
-local_port = 6010-6020,6022,6024-6028
-remote_port = 6010-6020,6022,6024-6028
-use_encryption = false
-use_compression = false
-
-[dns]
-type = udp
-local_ip = 114.114.114.114
-local_port = 53
-remote_port = 6002
-use_encryption = false
-use_compression = false
-
-[range:udp_port]
-type = udp
-local_ip = 127.0.0.1
-local_port = 6010-6020
-remote_port = 6010-6020
-use_encryption = false
-use_compression = false
-
-# Resolve your domain names to [server_addr] so you can use http://web01.yourdomain.com to browse web01 and http://web02.yourdomain.com to browse web02
-[web01]
-type = http
-local_ip = 127.0.0.1
-local_port = 80
-use_encryption = false
-use_compression = true
-# http username and password are safety certification for http protocol
-# if not set, you can access this custom_domains without certification
-http_user = admin
-http_pwd = admin
-# if domain for frps is frps.com, then you can access [web01] proxy by URL http://web01.frps.com
-subdomain = web01
-custom_domains = web01.yourdomain.com
-# locations is only available for http type
-locations = /,/pic
-# route requests to this service if http basic auto user is abc
-# route_by_http_user = abc
-host_header_rewrite = example.com
-# params with prefix "header_" will be used to update http request headers
-header_X-From-Where = frp
-health_check_type = http
-# frpc will send a GET http request '/status' to local http service
-# http service is alive when it return 2xx http response code
-health_check_url = /status
-health_check_interval_s = 10
-health_check_max_failed = 3
-health_check_timeout_s = 3
-
-[web02]
-type = https
-local_ip = 127.0.0.1
-local_port = 8000
-use_encryption = false
-use_compression = false
-subdomain = web01
-custom_domains = web02.yourdomain.com
-# if not empty, frpc will use proxy protocol to transfer connection info to your local service
-# v1 or v2 or empty
-proxy_protocol_version = v2
-
-[plugin_unix_domain_socket]
-type = tcp
-remote_port = 6003
-# if plugin is defined, local_ip and local_port is useless
-# plugin will handle connections got from frps
-plugin = unix_domain_socket
-# params with prefix "plugin_" that plugin needed
-plugin_unix_path = /var/run/docker.sock
-
-[plugin_http_proxy]
-type = tcp
-remote_port = 6004
-plugin = http_proxy
-plugin_http_user = abc
-plugin_http_passwd = abc
-
-[plugin_socks5]
-type = tcp
-remote_port = 6005
-plugin = socks5
-plugin_user = abc
-plugin_passwd = abc
-
-[plugin_static_file]
-type = tcp
-remote_port = 6006
-plugin = static_file
-plugin_local_path = /var/www/blog
-plugin_strip_prefix = static
-plugin_http_user = abc
-plugin_http_passwd = abc
-
-[plugin_https2http]
-type = https
-custom_domains = test.yourdomain.com
-plugin = https2http
-plugin_local_addr = 127.0.0.1:80
-plugin_crt_path = ./server.crt
-plugin_key_path = ./server.key
-plugin_host_header_rewrite = 127.0.0.1
-plugin_header_X-From-Where = frp
-
-[plugin_https2https]
-type = https
-custom_domains = test.yourdomain.com
-plugin = https2https
-plugin_local_addr = 127.0.0.1:443
-plugin_crt_path = ./server.crt
-plugin_key_path = ./server.key
-plugin_host_header_rewrite = 127.0.0.1
-plugin_header_X-From-Where = frp
-
-[plugin_http2https]
-type = http
-custom_domains = test.yourdomain.com
-plugin = http2https
-plugin_local_addr = 127.0.0.1:443
-plugin_host_header_rewrite = 127.0.0.1
-plugin_header_X-From-Where = frp
-
-[secret_tcp]
-# If the type is secret tcp, remote_port is useless
-# Who want to connect local port should deploy another frpc with stcp proxy and role is visitor
-type = stcp
-# sk used for authentication for visitors
-sk = abcdefg
-local_ip = 127.0.0.1
-local_port = 22
-use_encryption = false
-use_compression = false
-
-# user of frpc should be same in both stcp server and stcp visitor
-[secret_tcp_visitor]
-# frpc role visitor -> frps -> frpc role server
-role = visitor
-type = stcp
-# the server name you want to visitor
-server_name = secret_tcp
-sk = abcdefg
-# connect this address to visitor stcp server
-bind_addr = 127.0.0.1
-bind_port = 9000
-use_encryption = false
-use_compression = false
-
-[p2p_tcp]
-type = xtcp
-sk = abcdefg
-local_ip = 127.0.0.1
-local_port = 22
-use_encryption = false
-use_compression = false
-
-[p2p_tcp_visitor]
-role = visitor
-type = xtcp
-server_name = p2p_tcp
-sk = abcdefg
-bind_addr = 127.0.0.1
-bind_port = 9001
-use_encryption = false
-use_compression = false
-
-[tcpmuxhttpconnect]
-type = tcpmux
-multiplexer = httpconnect
-local_ip = 127.0.0.1
-local_port = 10701
-custom_domains = tunnel1
-# route_by_http_user = user1
diff --git a/apps/frpc/0.52.1/data/frpc_full.toml b/apps/frpc/0.52.1/data/frpc_full.toml
new file mode 100644
index 00000000..05d6cbe2
--- /dev/null
+++ b/apps/frpc/0.52.1/data/frpc_full.toml
@@ -0,0 +1,360 @@
+# your proxy name will be changed to {user}.{proxy}
+user = "your_name"
+
+# A literal address or host name for IPv6 must be enclosed
+# in square brackets, as in "[::1]:80", "[ipv6-host]:http" or "[ipv6-host%zone]:80"
+# For single serverAddr field, no need square brackets, like serverAddr = "::".
+serverAddr = "0.0.0.0"
+serverPort = 7000
+
+# STUN server to help penetrate NAT hole.
+# natHoleStunServer = "stun.easyvoip.com:3478"
+
+# Decide if exit program when first login failed, otherwise continuous relogin to frps
+# default is true
+loginFailExit = true
+
+# console or real logFile path like ./frpc.log
+log.to = "./frpc.log"
+# trace, debug, info, warn, error
+log.level = "info"
+log.maxDays = 3
+# disable log colors when log.to is console, default is false
+log.disablePrintColor = false
+
+auth.method = "token"
+# auth.additionalScopes specifies additional scopes to include authentication information.
+# Optional values are HeartBeats, NewWorkConns.
+# auth.additionalScopes = ["HeartBeats", "NewWorkConns"]
+
+# auth token
+auth.token = "12345678"
+
+# oidc.clientID specifies the client ID to use to get a token in OIDC authentication.
+# auth.oidc.clientID = ""
+# oidc.clientSecret specifies the client secret to use to get a token in OIDC authentication.
+# auth.oidc.clientSecret = ""
+# oidc.audience specifies the audience of the token in OIDC authentication.
+# auth.oidc.audience = ""
+# oidc_scope specifies the permisssions of the token in OIDC authentication if AuthenticationMethod == "oidc". By default, this value is "".
+# auth.oidc.scope = ""
+# oidc.tokenEndpointURL specifies the URL which implements OIDC Token Endpoint.
+# It will be used to get an OIDC token.
+# auth.oidc.tokenEndpointURL = ""
+
+# oidc.additionalEndpointParams specifies additional parameters to be sent to the OIDC Token Endpoint.
+# For example, if you want to specify the "audience" parameter, you can set as follow.
+# frp will add "audience=<value>" "var1=<value>" to the additional parameters.
+# auth.oidc.additionalEndpointParams.audience = "https://dev.auth.com/api/v2/"
+# auth.oidc.additionalEndpointParams.var1 = "foobar"
+
+# Set admin address for control frpc's action by http api such as reload
+webServer.addr = "127.0.0.1"
+webServer.port = 7400
+webServer.user = "admin"
+webServer.password = "admin"
+# Admin assets directory. By default, these assets are bundled with frpc.
+# webServer.assetsDir = "./static"
+
+# Enable golang pprof handlers in admin listener.
+webServer.pprofEnable = false
+
+# The maximum amount of time a dial to server will wait for a connect to complete. Default value is 10 seconds.
+# transport.dialServerTimeout = 10
+
+# dialServerKeepalive specifies the interval between keep-alive probes for an active network connection between frpc and frps.
+# If negative, keep-alive probes are disabled.
+# transport.dialServerKeepalive = 7200
+
+# connections will be established in advance, default value is zero
+transport.poolCount = 5
+
+# If tcp stream multiplexing is used, default is true, it must be same with frps
+# transport.tcpMux = true
+
+# Specify keep alive interval for tcp mux.
+# only valid if tcpMux is enabled.
+# transport.tcpMuxKeepaliveInterval = 60
+
+# Communication protocol used to connect to server
+# supports tcp, kcp, quic, websocket and wss now, default is tcp
+transport.protocol = "tcp"
+
+# set client binding ip when connect server, default is empty.
+# only when protocol = tcp or websocket, the value will be used.
+transport.connectServerLocalIP = "0.0.0.0"
+
+# if you want to connect frps by http proxy or socks5 proxy or ntlm proxy, you can set proxyURL here or in global environment variables
+# it only works when protocol is tcp
+# transport.proxyURL = "http://user:passwd@192.168.1.128:8080"
+# transport.proxyURL = "socks5://user:passwd@192.168.1.128:1080"
+# transport.proxyURL = "ntlm://user:passwd@192.168.1.128:2080"
+
+# quic protocol options
+# transport.quic.keepalivePeriod = 10
+# transport.quic.maxIdleTimeout = 30
+# transport.quic.maxIncomingStreams = 100000
+
+# If tls.enable is true, frpc will connect frps by tls.
+# Since v0.50.0, the default value has been changed to true, and tls is enabled by default.
+transport.tls.enable = true
+
+# transport.tls.certFile = "client.crt"
+# transport.tls.keyFile = "client.key"
+# transport.tls.trustedCaFile = "ca.crt"
+# transport.tls.serverName = "example.com"
+
+# If the disableCustomTLSFirstByte is set to false, frpc will establish a connection with frps using the
+# first custom byte when tls is enabled.
+# Since v0.50.0, the default value has been changed to true, and the first custom byte is disabled by default.
+# transport.tls.disableCustomTLSFirstByte = true
+
+# Heartbeat configure, it's not recommended to modify the default value.
+# The default value of heartbeat_interval is 10 and heartbeat_timeout is 90. Set negative value
+# to disable it.
+# transport.heartbeatInterval = 30
+# transport.heartbeatTimeout = 90
+
+# Specify a dns server, so frpc will use this instead of default one
+# dnsServer = "8.8.8.8"
+
+# Proxy names you want to start.
+# Default is empty, means all proxies.
+# start = ["ssh", "dns"]
+
+# Specify udp packet size, unit is byte. If not set, the default value is 1500.
+# This parameter should be same between client and server.
+# It affects the udp and sudp proxy.
+udpPacketSize = 1500
+
+# Additional metadatas for client.
+metadatas.var1 = "abc"
+metadatas.var2 = "123"
+
+# Include other config files for proxies.
+# includes = ["./confd/*.ini"]
+
+[[proxies]]
+# 'ssh' is the unique proxy name
+# If global user is not empty, it will be changed to {user}.{proxy} such as 'your_name.ssh'
+name = "ssh"
+type = "tcp"
+localIP = "127.0.0.1"
+localPort = 22
+# Limit bandwidth for this proxy, unit is KB and MB
+transport.bandwidthLimit = "1MB"
+# Where to limit bandwidth, can be 'client' or 'server', default is 'client'
+transport.bandwidthLimitMode = "client"
+# If true, traffic of this proxy will be encrypted, default is false
+transport.useEncryption = false
+# If true, traffic will be compressed
+transport.useCompression = false
+# Remote port listen by frps
+remotePort = 6001
+# frps will load balancing connections for proxies in same group
+loadBalancer.group = "test_group"
+# group should have same group key
+loadBalancer.groupKey = "123456"
+# Enable health check for the backend service, it supports 'tcp' and 'http' now.
+# frpc will connect local service's port to detect it's healthy status
+healthCheck.type = "tcp"
+# Health check connection timeout
+healthCheck.timeoutSeconds = 3
+# If continuous failed in 3 times, the proxy will be removed from frps
+healthCheck.maxFailed = 3
+# every 10 seconds will do a health check
+healthCheck.intervalSeconds = 10
+# additional meta info for each proxy
+metadatas.var1 = "abc"
+metadatas.var2 = "123"
+
+[[proxies]]
+name = "ssh_random"
+type = "tcp"
+localIP = "192.168.31.100"
+localPort = 22
+# If remote_port is 0, frps will assign a random port for you
+remotePort = 0
+
+[[proxies]]
+name = "dns"
+type = "udp"
+localIP = "114.114.114.114"
+localPort = 53
+remotePort = 6002
+
+# Resolve your domain names to [server_addr] so you can use http://web01.yourdomain.com to browse web01 and http://web02.yourdomain.com to browse web02
+[[proxies]]
+name = "web01"
+type = "http"
+localIP = "127.0.0.1"
+localPort = 80
+# http username and password are safety certification for http protocol
+# if not set, you can access this custom_domains without certification
+httpUser = "admin"
+httpPassword = "admin"
+# if domain for frps is frps.com, then you can access [web01] proxy by URL http://web01.frps.com
+subdomain = "web01"
+customDomains = ["web01.yourdomain.com"]
+# locations is only available for http type
+locations = ["/", "/pic"]
+# route requests to this service if http basic auto user is abc
+# route_by_http_user = abc
+hostHeaderRewrite = "example.com"
+# params with prefix "header_" will be used to update http request headers
+requestHeaders.set.x-from-where = "frp"
+healthCheck.type = "http"
+# frpc will send a GET http request '/status' to local http service
+# http service is alive when it return 2xx http response code
+healthCheck.path = "/status"
+healthCheck.intervalSeconds = 10
+healthCheck.maxFailed = 3
+healthCheck.timeoutSeconds = 3
+
+[[proxies]]
+name = "web02"
+type = "https"
+localIP = "127.0.0.1"
+localPort = 8000
+subdomain = "web02"
+customDomains = ["web02.yourdomain.com"]
+# if not empty, frpc will use proxy protocol to transfer connection info to your local service
+# v1 or v2 or empty
+transport.proxyProtocolVersion = "v2"
+
+[[proxies]]
+name = "tcpmuxhttpconnect"
+type = "tcpmux"
+multiplexer = "httpconnect"
+localIP = "127.0.0.1"
+localPort = 10701
+customDomains = ["tunnel1"]
+# routeByHTTPUser = "user1"
+
+[[proxies]]
+name = "plugin_unix_domain_socket"
+type = "tcp"
+remotePort = 6003
+# if plugin is defined, local_ip and local_port is useless
+# plugin will handle connections got from frps
+[proxies.plugin]
+type = "unix_domain_socket"
+unixPath = "/var/run/docker.sock"
+
+[[proxies]]
+name = "plugin_http_proxy"
+type = "tcp"
+remotePort = 6004
+[proxies.plugin]
+type = "http_proxy"
+httpUser = "abc"
+httpPassword = "abc"
+
+[[proxies]]
+name = "plugin_socks5"
+type = "tcp"
+remotePort = 6005
+[proxies.plugin]
+type = "socks5"
+username = "abc"
+password = "abc"
+
+[[proxies]]
+name = "plugin_static_file"
+type = "tcp"
+remotePort = 6006
+[proxies.plugin]
+type = "static_file"
+localPath = "/var/www/blog"
+stripPrefix = "static"
+httpUser = "abc"
+httpPassword = "abc"
+
+[[proxies]]
+name = "plugin_https2http"
+type = "https"
+customDomains = ["test.yourdomain.com"]
+[proxies.plugin]
+type = "https2http"
+localAddr = "127.0.0.1:80"
+crtPath = "./server.crt"
+keyPath = "./server.key"
+hostHeaderRewrite = "127.0.0.1"
+requestHeaders.set.x-from-where = "frp"
+
+[[proxies]]
+name = "plugin_https2https"
+type = "https"
+customDomains = ["test.yourdomain.com"]
+[proxies.plugin]
+type = "https2https"
+localAddr = "127.0.0.1:443"
+crtPath = "./server.crt"
+keyPath = "./server.key"
+hostHeaderRewrite = "127.0.0.1"
+requestHeaders.set.x-from-where = "frp"
+
+[[proxies]]
+name = "plugin_http2https"
+type = "http"
+customDomains = ["test.yourdomain.com"]
+[proxies.plugin]
+type = "http2https"
+localAddr = "127.0.0.1:443"
+hostHeaderRewrite = "127.0.0.1"
+requestHeaders.set.x-from-where = "frp"
+
+[[proxies]]
+name = "secret_tcp"
+# If the type is secret tcp, remote_port is useless
+# Who want to connect local port should deploy another frpc with stcp proxy and role is visitor
+type = "stcp"
+# secretKey is used for authentication for visitors
+secretKey = "abcdefg"
+localIP = "127.0.0.1"
+localPort = 22
+# If not empty, only visitors from specified users can connect.
+# Otherwise, visitors from same user can connect. '*' means allow all users.
+allowUsers = ["*"]
+
+[[proxies]]
+name = "p2p_tcp"
+type = "xtcp"
+secretKey = "abcdefg"
+localIP = "127.0.0.1"
+localPort = 22
+# If not empty, only visitors from specified users can connect.
+# Otherwise, visitors from same user can connect. '*' means allow all users.
+allowUsers = ["user1", "user2"]
+
+# frpc role visitor -> frps -> frpc role server
+[[visitors]]
+name = "secret_tcp_visitor"
+type = "stcp"
+# the server name you want to visitor
+serverName = "secret_tcp"
+secretKey = "abcdefg"
+# connect this address to visitor stcp server
+bindAddr = "127.0.0.1"
+# bindPort can be less than 0, it means don't bind to the port and only receive connections redirected from
+# other visitors. (This is not supported for SUDP now)
+bindPort = 9000
+
+[[visitors]]
+name = "p2p_tcp_visitor"
+type = "xtcp"
+# if the server user is not set, it defaults to the current user
+serverUser = "user1"
+serverName = "p2p_tcp"
+secretKey = "abcdefg"
+bindAddr = "127.0.0.1"
+# bindPort can be less than 0, it means don't bind to the port and only receive connections redirected from
+# other visitors. (This is not supported for SUDP now)
+bindPort = 9001
+# when automatic tunnel persistence is required, set it to true
+keepTunnelOpen = false
+# effective when keep_tunnel_open is set to true, the number of attempts to punch through per hour
+maxRetriesAnHour = 8
+minRetryInterval = 90
+# fallbackTo = "stcp_visitor"
+# fallbackTimeoutMs = 500
diff --git a/apps/frpc/0.52.1/data/frps.ini b/apps/frpc/0.52.1/data/frps.ini
deleted file mode 100644
index 229567a9..00000000
--- a/apps/frpc/0.52.1/data/frps.ini
+++ /dev/null
@@ -1,2 +0,0 @@
-[common]
-bind_port = 7000
diff --git a/apps/frpc/0.52.1/data/frps_full.ini b/apps/frpc/0.52.1/data/frps_full.ini
deleted file mode 100644
index 2d5e08e1..00000000
--- a/apps/frpc/0.52.1/data/frps_full.ini
+++ /dev/null
@@ -1,168 +0,0 @@
-# [common] is integral section
-[common]
-# A literal address or host name for IPv6 must be enclosed
-# in square brackets, as in "[::1]:80", "[ipv6-host]:http" or "[ipv6-host%zone]:80"
-# For single "bind_addr" field, no need square brackets, like "bind_addr = ::".
-bind_addr = 0.0.0.0
-bind_port = 7000
-
-# udp port to help make udp hole to penetrate nat
-bind_udp_port = 7001
-
-# udp port used for kcp protocol, it can be same with 'bind_port'.
-# if not set, kcp is disabled in frps.
-kcp_bind_port = 7000
-
-# udp port used for quic protocol.
-# if not set, quic is disabled in frps.
-# quic_bind_port = 7002
-# quic protocol options
-# quic_keepalive_period = 10
-# quic_max_idle_timeout = 30
-# quic_max_incoming_streams = 100000
-
-# specify which address proxy will listen for, default value is same with bind_addr
-# proxy_bind_addr = 127.0.0.1
-
-# if you want to support virtual host, you must set the http port for listening (optional)
-# Note: http port and https port can be same with bind_port
-vhost_http_port = 80
-vhost_https_port = 443
-
-# response header timeout(seconds) for vhost http server, default is 60s
-# vhost_http_timeout = 60
-
-# tcpmux_httpconnect_port specifies the port that the server listens for TCP
-# HTTP CONNECT requests. If the value is 0, the server will not multiplex TCP
-# requests on one single port. If it's not - it will listen on this value for
-# HTTP CONNECT requests. By default, this value is 0.
-# tcpmux_httpconnect_port = 1337
-
-# If tcpmux_passthrough is true, frps won't do any update on traffic.
-# tcpmux_passthrough = false
-
-# set dashboard_addr and dashboard_port to view dashboard of frps
-# dashboard_addr's default value is same with bind_addr
-# dashboard is available only if dashboard_port is set
-dashboard_addr = 0.0.0.0
-dashboard_port = 7500
-
-# dashboard user and passwd for basic auth protect
-dashboard_user = admin
-dashboard_pwd = admin
-
-# dashboard TLS mode
-dashboard_tls_mode = false
-# dashboard_tls_cert_file = server.crt
-# dashboard_tls_key_file = server.key
-
-# enable_prometheus will export prometheus metrics on {dashboard_addr}:{dashboard_port} in /metrics api.
-enable_prometheus = true
-
-# dashboard assets directory(only for debug mode)
-# assets_dir = ./static
-
-# console or real logFile path like ./frps.log
-log_file = ./frps.log
-
-# trace, debug, info, warn, error
-log_level = info
-
-log_max_days = 3
-
-# disable log colors when log_file is console, default is false
-disable_log_color = false
-
-# DetailedErrorsToClient defines whether to send the specific error (with debug info) to frpc. By default, this value is true.
-detailed_errors_to_client = true
-
-# authentication_method specifies what authentication method to use authenticate frpc with frps.
-# If "token" is specified - token will be read into login message.
-# If "oidc" is specified - OIDC (Open ID Connect) token will be issued using OIDC settings. By default, this value is "token".
-authentication_method = token
-
-# authenticate_heartbeats specifies whether to include authentication token in heartbeats sent to frps. By default, this value is false.
-authenticate_heartbeats = false
-
-# AuthenticateNewWorkConns specifies whether to include authentication token in new work connections sent to frps. By default, this value is false.
-authenticate_new_work_conns = false
-
-# auth token
-token = 12345678
-
-# oidc_issuer specifies the issuer to verify OIDC tokens with.
-# By default, this value is "".
-oidc_issuer =
-
-# oidc_audience specifies the audience OIDC tokens should contain when validated.
-# By default, this value is "".
-oidc_audience =
-
-# oidc_skip_expiry_check specifies whether to skip checking if the OIDC token is expired.
-# By default, this value is false.
-oidc_skip_expiry_check = false
-
-# oidc_skip_issuer_check specifies whether to skip checking if the OIDC token's issuer claim matches the issuer specified in OidcIssuer.
-# By default, this value is false.
-oidc_skip_issuer_check = false
-
-# heartbeat configure, it's not recommended to modify the default value
-# the default value of heartbeat_timeout is 90. Set negative value to disable it.
-# heartbeat_timeout = 90
-
-# user_conn_timeout configure, it's not recommended to modify the default value
-# the default value of user_conn_timeout is 10
-# user_conn_timeout = 10
-
-# only allow frpc to bind ports you list, if you set nothing, there won't be any limit
-allow_ports = 2000-3000,3001,3003,4000-50000
-
-# pool_count in each proxy will change to max_pool_count if they exceed the maximum value
-max_pool_count = 5
-
-# max ports can be used for each client, default value is 0 means no limit
-max_ports_per_client = 0
-
-# tls_only specifies whether to only accept TLS-encrypted connections. By default, the value is false.
-tls_only = false
-
-# tls_cert_file = server.crt
-# tls_key_file = server.key
-# tls_trusted_ca_file = ca.crt
-
-# if subdomain_host is not empty, you can set subdomain when type is http or https in frpc's configure file
-# when subdomain is test, the host used by routing is test.frps.com
-subdomain_host = frps.com
-
-# if tcp stream multiplexing is used, default is true
-# tcp_mux = true
-
-# specify keep alive interval for tcp mux.
-# only valid if tcp_mux is true.
-# tcp_mux_keepalive_interval = 60
-
-# tcp_keepalive specifies the interval between keep-alive probes for an active network connection between frpc and frps.
-# If negative, keep-alive probes are disabled.
-# tcp_keepalive = 7200
-
-# custom 404 page for HTTP requests
-# custom_404_page = /path/to/404.html
-
-# specify udp packet size, unit is byte. If not set, the default value is 1500.
-# This parameter should be same between client and server.
-# It affects the udp and sudp proxy.
-udp_packet_size = 1500
-
-# Enable golang pprof handlers in dashboard listener.
-# Dashboard port must be set first
-pprof_enable = false
-
-[plugin.user-manager]
-addr = 127.0.0.1:9000
-path = /handler
-ops = Login
-
-[plugin.port-manager]
-addr = 127.0.0.1:9001
-path = /handler
-ops = NewProxy
diff --git a/apps/frpc/0.52.1/docker-compose.yml b/apps/frpc/0.52.1/docker-compose.yml
index b61b5219..a5dfc7d9 100644
--- a/apps/frpc/0.52.1/docker-compose.yml
+++ b/apps/frpc/0.52.1/docker-compose.yml
@@ -5,7 +5,7 @@ services:
     restart: always
     network_mode: "host"
     volumes:
-        - "./data/frpc.ini:/etc/frp/frpc.ini"
+        - "./data/frpc.toml:/etc/frp/frpc.toml"
     image: "snowdreamtech/frpc:0.52.1"
     labels:  
       createdBy: "Apps"
diff --git a/apps/frps/0.52.1/data/frpc.ini b/apps/frps/0.52.1/data/frpc.ini
deleted file mode 100644
index 13a8e5f6..00000000
--- a/apps/frps/0.52.1/data/frpc.ini
+++ /dev/null
@@ -1,9 +0,0 @@
-[common]
-server_addr = 127.0.0.1
-server_port = 7000
-
-[ssh]
-type = tcp
-local_ip = 127.0.0.1
-local_port = 22
-remote_port = 6000
diff --git a/apps/frps/0.52.1/data/frpc_full.ini b/apps/frps/0.52.1/data/frpc_full.ini
deleted file mode 100644
index 29f6bcab..00000000
--- a/apps/frps/0.52.1/data/frpc_full.ini
+++ /dev/null
@@ -1,365 +0,0 @@
-# [common] is integral section
-[common]
-# A literal address or host name for IPv6 must be enclosed
-# in square brackets, as in "[::1]:80", "[ipv6-host]:http" or "[ipv6-host%zone]:80"
-# For single "server_addr" field, no need square brackets, like "server_addr = ::".
-server_addr = 0.0.0.0
-server_port = 7000
-
-# The maximum amount of time a dial to server will wait for a connect to complete. Default value is 10 seconds.
-# dial_server_timeout = 10
-
-# dial_server_keepalive specifies the interval between keep-alive probes for an active network connection between frpc and frps.
-# If negative, keep-alive probes are disabled.
-# dial_server_keepalive = 7200
-
-# if you want to connect frps by http proxy or socks5 proxy or ntlm proxy, you can set http_proxy here or in global environment variables
-# it only works when protocol is tcp
-# http_proxy = http://user:passwd@192.168.1.128:8080
-# http_proxy = socks5://user:passwd@192.168.1.128:1080
-# http_proxy = ntlm://user:passwd@192.168.1.128:2080
-
-# console or real logFile path like ./frpc.log
-log_file = ./frpc.log
-
-# trace, debug, info, warn, error
-log_level = info
-
-log_max_days = 3
-
-# disable log colors when log_file is console, default is false
-disable_log_color = false
-
-# for authentication, should be same as your frps.ini
-# authenticate_heartbeats specifies whether to include authentication token in heartbeats sent to frps. By default, this value is false.
-authenticate_heartbeats = false
-
-# authenticate_new_work_conns specifies whether to include authentication token in new work connections sent to frps. By default, this value is false.
-authenticate_new_work_conns = false
-
-# auth token
-token = 12345678
-
-authentication_method = 
-
-# oidc_client_id specifies the client ID to use to get a token in OIDC authentication if AuthenticationMethod == "oidc".
-# By default, this value is "".
-oidc_client_id =
-
-# oidc_client_secret specifies the client secret to use to get a token in OIDC authentication if AuthenticationMethod == "oidc".
-# By default, this value is "".
-oidc_client_secret =
-
-# oidc_audience specifies the audience of the token in OIDC authentication if AuthenticationMethod == "oidc". By default, this value is "".
-oidc_audience =
-
-# oidc_scope specifies the permisssions of the token in OIDC authentication if AuthenticationMethod == "oidc". By default, this value is "".
-oidc_scope =
-
-# oidc_token_endpoint_url specifies the URL which implements OIDC Token Endpoint.
-# It will be used to get an OIDC token if AuthenticationMethod == "oidc". By default, this value is "".
-oidc_token_endpoint_url =
-
-# oidc_additional_xxx specifies additional parameters to be sent to the OIDC Token Endpoint.
-# For example, if you want to specify the "audience" parameter, you can set as follow.
-# frp will add "audience=<value>" "var1=<value>" to the additional parameters.
-# oidc_additional_audience = https://dev.auth.com/api/v2/
-# oidc_additional_var1 = foobar
-
-# set admin address for control frpc's action by http api such as reload
-admin_addr = 127.0.0.1
-admin_port = 7400
-admin_user = admin
-admin_pwd = admin
-# Admin assets directory. By default, these assets are bundled with frpc.
-# assets_dir = ./static
-
-# connections will be established in advance, default value is zero
-pool_count = 5
-
-# if tcp stream multiplexing is used, default is true, it must be same with frps
-# tcp_mux = true
-
-# specify keep alive interval for tcp mux.
-# only valid if tcp_mux is true.
-# tcp_mux_keepalive_interval = 60
-
-# your proxy name will be changed to {user}.{proxy}
-user = your_name
-
-# decide if exit program when first login failed, otherwise continuous relogin to frps
-# default is true
-login_fail_exit = true
-
-# communication protocol used to connect to server
-# supports tcp, kcp, quic and websocket now, default is tcp
-protocol = tcp
-
-# set client binding ip when connect server, default is empty.
-# only when protocol = tcp or websocket, the value will be used.
-connect_server_local_ip = 0.0.0.0
-
-# quic protocol options
-# quic_keepalive_period = 10
-# quic_max_idle_timeout = 30
-# quic_max_incoming_streams = 100000
-
-# if tls_enable is true, frpc will connect frps by tls
-tls_enable = true
-
-# tls_cert_file = client.crt
-# tls_key_file = client.key
-# tls_trusted_ca_file = ca.crt
-# tls_server_name = example.com
-
-# specify a dns server, so frpc will use this instead of default one
-# dns_server = 8.8.8.8
-
-# proxy names you want to start separated by ','
-# default is empty, means all proxies
-# start = ssh,dns
-
-# heartbeat configure, it's not recommended to modify the default value
-# The default value of heartbeat_interval is 10 and heartbeat_timeout is 90. Set negative value
-# to disable it.
-# heartbeat_interval = 30
-# heartbeat_timeout = 90
-
-# additional meta info for client
-meta_var1 = 123
-meta_var2 = 234
-
-# specify udp packet size, unit is byte. If not set, the default value is 1500.
-# This parameter should be same between client and server.
-# It affects the udp and sudp proxy.
-udp_packet_size = 1500
-
-# include other config files for proxies.
-# includes = ./confd/*.ini
-
-# By default, frpc will connect frps with first custom byte if tls is enabled.
-# If DisableCustomTLSFirstByte is true, frpc will not send that custom byte.
-disable_custom_tls_first_byte = false
-
-# Enable golang pprof handlers in admin listener.
-# Admin port must be set first.
-pprof_enable = false
-
-# 'ssh' is the unique proxy name
-# if user in [common] section is not empty, it will be changed to {user}.{proxy} such as 'your_name.ssh'
-[ssh]
-# tcp | udp | http | https | stcp | xtcp, default is tcp
-type = tcp
-local_ip = 127.0.0.1
-local_port = 22
-# limit bandwidth for this proxy, unit is KB and MB
-bandwidth_limit = 1MB
-# where to limit bandwidth, can be 'client' or 'server', default is 'client'
-bandwidth_limit_mode = client
-# true or false, if true, messages between frps and frpc will be encrypted, default is false
-use_encryption = false
-# if true, message will be compressed
-use_compression = false
-# remote port listen by frps
-remote_port = 6001
-# frps will load balancing connections for proxies in same group
-group = test_group
-# group should have same group key
-group_key = 123456
-# enable health check for the backend service, it support 'tcp' and 'http' now
-# frpc will connect local service's port to detect it's healthy status
-health_check_type = tcp
-# health check connection timeout
-health_check_timeout_s = 3
-# if continuous failed in 3 times, the proxy will be removed from frps
-health_check_max_failed = 3
-# every 10 seconds will do a health check
-health_check_interval_s = 10
-# additional meta info for each proxy
-meta_var1 = 123
-meta_var2 = 234
-
-[ssh_random]
-type = tcp
-local_ip = 127.0.0.1
-local_port = 22
-# if remote_port is 0, frps will assign a random port for you
-remote_port = 0
-
-# if you want to expose multiple ports, add 'range:' prefix to the section name
-# frpc will generate multiple proxies such as 'tcp_port_6010', 'tcp_port_6011' and so on.
-[range:tcp_port]
-type = tcp
-local_ip = 127.0.0.1
-local_port = 6010-6020,6022,6024-6028
-remote_port = 6010-6020,6022,6024-6028
-use_encryption = false
-use_compression = false
-
-[dns]
-type = udp
-local_ip = 114.114.114.114
-local_port = 53
-remote_port = 6002
-use_encryption = false
-use_compression = false
-
-[range:udp_port]
-type = udp
-local_ip = 127.0.0.1
-local_port = 6010-6020
-remote_port = 6010-6020
-use_encryption = false
-use_compression = false
-
-# Resolve your domain names to [server_addr] so you can use http://web01.yourdomain.com to browse web01 and http://web02.yourdomain.com to browse web02
-[web01]
-type = http
-local_ip = 127.0.0.1
-local_port = 80
-use_encryption = false
-use_compression = true
-# http username and password are safety certification for http protocol
-# if not set, you can access this custom_domains without certification
-http_user = admin
-http_pwd = admin
-# if domain for frps is frps.com, then you can access [web01] proxy by URL http://web01.frps.com
-subdomain = web01
-custom_domains = web01.yourdomain.com
-# locations is only available for http type
-locations = /,/pic
-# route requests to this service if http basic auto user is abc
-# route_by_http_user = abc
-host_header_rewrite = example.com
-# params with prefix "header_" will be used to update http request headers
-header_X-From-Where = frp
-health_check_type = http
-# frpc will send a GET http request '/status' to local http service
-# http service is alive when it return 2xx http response code
-health_check_url = /status
-health_check_interval_s = 10
-health_check_max_failed = 3
-health_check_timeout_s = 3
-
-[web02]
-type = https
-local_ip = 127.0.0.1
-local_port = 8000
-use_encryption = false
-use_compression = false
-subdomain = web01
-custom_domains = web02.yourdomain.com
-# if not empty, frpc will use proxy protocol to transfer connection info to your local service
-# v1 or v2 or empty
-proxy_protocol_version = v2
-
-[plugin_unix_domain_socket]
-type = tcp
-remote_port = 6003
-# if plugin is defined, local_ip and local_port is useless
-# plugin will handle connections got from frps
-plugin = unix_domain_socket
-# params with prefix "plugin_" that plugin needed
-plugin_unix_path = /var/run/docker.sock
-
-[plugin_http_proxy]
-type = tcp
-remote_port = 6004
-plugin = http_proxy
-plugin_http_user = abc
-plugin_http_passwd = abc
-
-[plugin_socks5]
-type = tcp
-remote_port = 6005
-plugin = socks5
-plugin_user = abc
-plugin_passwd = abc
-
-[plugin_static_file]
-type = tcp
-remote_port = 6006
-plugin = static_file
-plugin_local_path = /var/www/blog
-plugin_strip_prefix = static
-plugin_http_user = abc
-plugin_http_passwd = abc
-
-[plugin_https2http]
-type = https
-custom_domains = test.yourdomain.com
-plugin = https2http
-plugin_local_addr = 127.0.0.1:80
-plugin_crt_path = ./server.crt
-plugin_key_path = ./server.key
-plugin_host_header_rewrite = 127.0.0.1
-plugin_header_X-From-Where = frp
-
-[plugin_https2https]
-type = https
-custom_domains = test.yourdomain.com
-plugin = https2https
-plugin_local_addr = 127.0.0.1:443
-plugin_crt_path = ./server.crt
-plugin_key_path = ./server.key
-plugin_host_header_rewrite = 127.0.0.1
-plugin_header_X-From-Where = frp
-
-[plugin_http2https]
-type = http
-custom_domains = test.yourdomain.com
-plugin = http2https
-plugin_local_addr = 127.0.0.1:443
-plugin_host_header_rewrite = 127.0.0.1
-plugin_header_X-From-Where = frp
-
-[secret_tcp]
-# If the type is secret tcp, remote_port is useless
-# Who want to connect local port should deploy another frpc with stcp proxy and role is visitor
-type = stcp
-# sk used for authentication for visitors
-sk = abcdefg
-local_ip = 127.0.0.1
-local_port = 22
-use_encryption = false
-use_compression = false
-
-# user of frpc should be same in both stcp server and stcp visitor
-[secret_tcp_visitor]
-# frpc role visitor -> frps -> frpc role server
-role = visitor
-type = stcp
-# the server name you want to visitor
-server_name = secret_tcp
-sk = abcdefg
-# connect this address to visitor stcp server
-bind_addr = 127.0.0.1
-bind_port = 9000
-use_encryption = false
-use_compression = false
-
-[p2p_tcp]
-type = xtcp
-sk = abcdefg
-local_ip = 127.0.0.1
-local_port = 22
-use_encryption = false
-use_compression = false
-
-[p2p_tcp_visitor]
-role = visitor
-type = xtcp
-server_name = p2p_tcp
-sk = abcdefg
-bind_addr = 127.0.0.1
-bind_port = 9001
-use_encryption = false
-use_compression = false
-
-[tcpmuxhttpconnect]
-type = tcpmux
-multiplexer = httpconnect
-local_ip = 127.0.0.1
-local_port = 10701
-custom_domains = tunnel1
-# route_by_http_user = user1
diff --git a/apps/frps/0.52.1/data/frps.ini b/apps/frps/0.52.1/data/frps.ini
deleted file mode 100644
index 229567a9..00000000
--- a/apps/frps/0.52.1/data/frps.ini
+++ /dev/null
@@ -1,2 +0,0 @@
-[common]
-bind_port = 7000
diff --git a/apps/frps/0.52.1/data/frps.toml b/apps/frps/0.52.1/data/frps.toml
new file mode 100644
index 00000000..82957d82
--- /dev/null
+++ b/apps/frps/0.52.1/data/frps.toml
@@ -0,0 +1 @@
+bindPort = 7000
\ No newline at end of file
diff --git a/apps/frps/0.52.1/data/frps_full.ini b/apps/frps/0.52.1/data/frps_full.ini
deleted file mode 100644
index 2d5e08e1..00000000
--- a/apps/frps/0.52.1/data/frps_full.ini
+++ /dev/null
@@ -1,168 +0,0 @@
-# [common] is integral section
-[common]
-# A literal address or host name for IPv6 must be enclosed
-# in square brackets, as in "[::1]:80", "[ipv6-host]:http" or "[ipv6-host%zone]:80"
-# For single "bind_addr" field, no need square brackets, like "bind_addr = ::".
-bind_addr = 0.0.0.0
-bind_port = 7000
-
-# udp port to help make udp hole to penetrate nat
-bind_udp_port = 7001
-
-# udp port used for kcp protocol, it can be same with 'bind_port'.
-# if not set, kcp is disabled in frps.
-kcp_bind_port = 7000
-
-# udp port used for quic protocol.
-# if not set, quic is disabled in frps.
-# quic_bind_port = 7002
-# quic protocol options
-# quic_keepalive_period = 10
-# quic_max_idle_timeout = 30
-# quic_max_incoming_streams = 100000
-
-# specify which address proxy will listen for, default value is same with bind_addr
-# proxy_bind_addr = 127.0.0.1
-
-# if you want to support virtual host, you must set the http port for listening (optional)
-# Note: http port and https port can be same with bind_port
-vhost_http_port = 80
-vhost_https_port = 443
-
-# response header timeout(seconds) for vhost http server, default is 60s
-# vhost_http_timeout = 60
-
-# tcpmux_httpconnect_port specifies the port that the server listens for TCP
-# HTTP CONNECT requests. If the value is 0, the server will not multiplex TCP
-# requests on one single port. If it's not - it will listen on this value for
-# HTTP CONNECT requests. By default, this value is 0.
-# tcpmux_httpconnect_port = 1337
-
-# If tcpmux_passthrough is true, frps won't do any update on traffic.
-# tcpmux_passthrough = false
-
-# set dashboard_addr and dashboard_port to view dashboard of frps
-# dashboard_addr's default value is same with bind_addr
-# dashboard is available only if dashboard_port is set
-dashboard_addr = 0.0.0.0
-dashboard_port = 7500
-
-# dashboard user and passwd for basic auth protect
-dashboard_user = admin
-dashboard_pwd = admin
-
-# dashboard TLS mode
-dashboard_tls_mode = false
-# dashboard_tls_cert_file = server.crt
-# dashboard_tls_key_file = server.key
-
-# enable_prometheus will export prometheus metrics on {dashboard_addr}:{dashboard_port} in /metrics api.
-enable_prometheus = true
-
-# dashboard assets directory(only for debug mode)
-# assets_dir = ./static
-
-# console or real logFile path like ./frps.log
-log_file = ./frps.log
-
-# trace, debug, info, warn, error
-log_level = info
-
-log_max_days = 3
-
-# disable log colors when log_file is console, default is false
-disable_log_color = false
-
-# DetailedErrorsToClient defines whether to send the specific error (with debug info) to frpc. By default, this value is true.
-detailed_errors_to_client = true
-
-# authentication_method specifies what authentication method to use authenticate frpc with frps.
-# If "token" is specified - token will be read into login message.
-# If "oidc" is specified - OIDC (Open ID Connect) token will be issued using OIDC settings. By default, this value is "token".
-authentication_method = token
-
-# authenticate_heartbeats specifies whether to include authentication token in heartbeats sent to frps. By default, this value is false.
-authenticate_heartbeats = false
-
-# AuthenticateNewWorkConns specifies whether to include authentication token in new work connections sent to frps. By default, this value is false.
-authenticate_new_work_conns = false
-
-# auth token
-token = 12345678
-
-# oidc_issuer specifies the issuer to verify OIDC tokens with.
-# By default, this value is "".
-oidc_issuer =
-
-# oidc_audience specifies the audience OIDC tokens should contain when validated.
-# By default, this value is "".
-oidc_audience =
-
-# oidc_skip_expiry_check specifies whether to skip checking if the OIDC token is expired.
-# By default, this value is false.
-oidc_skip_expiry_check = false
-
-# oidc_skip_issuer_check specifies whether to skip checking if the OIDC token's issuer claim matches the issuer specified in OidcIssuer.
-# By default, this value is false.
-oidc_skip_issuer_check = false
-
-# heartbeat configure, it's not recommended to modify the default value
-# the default value of heartbeat_timeout is 90. Set negative value to disable it.
-# heartbeat_timeout = 90
-
-# user_conn_timeout configure, it's not recommended to modify the default value
-# the default value of user_conn_timeout is 10
-# user_conn_timeout = 10
-
-# only allow frpc to bind ports you list, if you set nothing, there won't be any limit
-allow_ports = 2000-3000,3001,3003,4000-50000
-
-# pool_count in each proxy will change to max_pool_count if they exceed the maximum value
-max_pool_count = 5
-
-# max ports can be used for each client, default value is 0 means no limit
-max_ports_per_client = 0
-
-# tls_only specifies whether to only accept TLS-encrypted connections. By default, the value is false.
-tls_only = false
-
-# tls_cert_file = server.crt
-# tls_key_file = server.key
-# tls_trusted_ca_file = ca.crt
-
-# if subdomain_host is not empty, you can set subdomain when type is http or https in frpc's configure file
-# when subdomain is test, the host used by routing is test.frps.com
-subdomain_host = frps.com
-
-# if tcp stream multiplexing is used, default is true
-# tcp_mux = true
-
-# specify keep alive interval for tcp mux.
-# only valid if tcp_mux is true.
-# tcp_mux_keepalive_interval = 60
-
-# tcp_keepalive specifies the interval between keep-alive probes for an active network connection between frpc and frps.
-# If negative, keep-alive probes are disabled.
-# tcp_keepalive = 7200
-
-# custom 404 page for HTTP requests
-# custom_404_page = /path/to/404.html
-
-# specify udp packet size, unit is byte. If not set, the default value is 1500.
-# This parameter should be same between client and server.
-# It affects the udp and sudp proxy.
-udp_packet_size = 1500
-
-# Enable golang pprof handlers in dashboard listener.
-# Dashboard port must be set first
-pprof_enable = false
-
-[plugin.user-manager]
-addr = 127.0.0.1:9000
-path = /handler
-ops = Login
-
-[plugin.port-manager]
-addr = 127.0.0.1:9001
-path = /handler
-ops = NewProxy
diff --git a/apps/frps/0.52.1/data/frps_full.toml b/apps/frps/0.52.1/data/frps_full.toml
new file mode 100644
index 00000000..180a3b24
--- /dev/null
+++ b/apps/frps/0.52.1/data/frps_full.toml
@@ -0,0 +1,154 @@
+# A literal address or host name for IPv6 must be enclosed
+# in square brackets, as in "[::1]:80", "[ipv6-host]:http" or "[ipv6-host%zone]:80"
+# For single "bind_addr" field, no need square brackets, like "bind_addr = ::".
+bindAddr = "0.0.0.0"
+bindPort = 7000
+
+# udp port used for kcp protocol, it can be same with 'bind_port'.
+# if not set, kcp is disabled in frps.
+kcpBindPort = 7000
+
+# udp port used for quic protocol.
+# if not set, quic is disabled in frps.
+# quicBindPort = 7002
+
+# Specify which address proxy will listen for, default value is same with bind_addr
+# proxy_bind_addr = "127.0.0.1"
+
+# quic protocol options
+# transport.quic.keepalivePeriod = 10
+# transport.quic.maxIdleTimeout = 30
+# transport.quic.maxIncomingStreams = 100000
+
+# Heartbeat configure, it's not recommended to modify the default value
+# The default value of heartbeat_timeout is 90. Set negative value to disable it.
+# transport.heartbeatTimeout = 90
+
+# Pool count in each proxy will keep no more than maxPoolCount.
+transport.maxPoolCount = 5
+
+# If tcp stream multiplexing is used, default is true
+# transport.tcpMux = true
+
+# Specify keep alive interval for tcp mux.
+# only valid if tcpMux is true.
+# transport.tcpMuxKeepaliveInterval = 60
+
+# tcpKeepalive specifies the interval between keep-alive probes for an active network connection between frpc and frps.
+# If negative, keep-alive probes are disabled.
+# transport.tcpKeepalive = 7200
+
+# transport.tls.force specifies whether to only accept TLS-encrypted connections. By default, the value is false.
+tls.force = false
+
+# transport.tls.certFile = "server.crt"
+# transport.tls.keyFile = "server.key"
+# transport.tls.trustedCaFile = "ca.crt"
+
+# If you want to support virtual host, you must set the http port for listening (optional)
+# Note: http port and https port can be same with bind_port
+vhostHTTPPort = 80
+vhostHTTPSPort = 443
+
+# Response header timeout(seconds) for vhost http server, default is 60s
+# vhostHTTPTimeout = 60
+
+# tcpmuxHTTPConnectPort specifies the port that the server listens for TCP
+# HTTP CONNECT requests. If the value is 0, the server will not multiplex TCP
+# requests on one single port. If it's not - it will listen on this value for
+# HTTP CONNECT requests. By default, this value is 0.
+# tcpmuxHTTPConnectPort = 1337
+
+# If tcpmux_passthrough is true, frps won't do any update on traffic.
+# tcpmuxPassthrough = false
+
+# Configure the web server to enable the dashboard for frps.
+# dashboard is available only if webServer.port is set.
+webServer.addr = "127.0.0.1"
+webServer.port = 7500
+webServer.user = "admin"
+webServer.password = "admin"
+# webServer.tls.certFile = "server.crt"
+# webServer.tls.keyFile = "server.key"
+# dashboard assets directory(only for debug mode)
+# webServer.assetsDir = "./static"
+
+# Enable golang pprof handlers in dashboard listener.
+# Dashboard port must be set first
+webServer.pprofEnable = false
+
+# enablePrometheus will export prometheus metrics on webServer in /metrics api.
+enablePrometheus = true
+
+# console or real logFile path like ./frps.log
+log.to = "./frps.log"
+# trace, debug, info, warn, error
+log.level = "info"
+log.maxDays = 3
+# disable log colors when log.to is console, default is false
+log.disablePrintColor = false
+
+# DetailedErrorsToClient defines whether to send the specific error (with debug info) to frpc. By default, this value is true.
+detailedErrorsToClient = true
+
+# auth.method specifies what authentication method to use authenticate frpc with frps.
+# If "token" is specified - token will be read into login message.
+# If "oidc" is specified - OIDC (Open ID Connect) token will be issued using OIDC settings. By default, this value is "token".
+auth.method = "token"
+
+# auth.additionalScopes specifies additional scopes to include authentication information.
+# Optional values are HeartBeats, NewWorkConns.
+# auth.additionalScopes = ["HeartBeats", "NewWorkConns"]
+
+# auth token
+auth.token = "12345678"
+
+# oidc issuer specifies the issuer to verify OIDC tokens with.
+auth.oidc.issuer = ""
+# oidc audience specifies the audience OIDC tokens should contain when validated.
+auth.oidc.audience = ""
+# oidc skipExpiryCheck specifies whether to skip checking if the OIDC token is expired.
+auth.oidc.skipExpiryCheck = false
+# oidc skipIssuerCheck specifies whether to skip checking if the OIDC token's issuer claim matches the issuer specified in OidcIssuer.
+auth.oidc.skipIssuerCheck = false
+
+# userConnTimeout specifies the maximum time to wait for a work connection.
+# userConnTimeout = 10
+
+# Only allow frpc to bind ports you list. By default, there won't be any limit.
+allowPorts = [
+  { start = 2000, end = 3000 },
+  { single = 3001 },
+  { single = 3003 },
+  { start = 4000, end = 50000 }
+]
+
+# Max ports can be used for each client, default value is 0 means no limit
+maxPortsPerClient = 0
+
+# If subDomainHost is not empty, you can set subdomain when type is http or https in frpc's configure file
+# When subdomain is est, the host used by routing is test.frps.com
+subDomainHost = "frps.com"
+
+# custom 404 page for HTTP requests
+# custom404Page = "/path/to/404.html"
+
+# specify udp packet size, unit is byte. If not set, the default value is 1500.
+# This parameter should be same between client and server.
+# It affects the udp and sudp proxy.
+udpPacketSize = 1500
+
+# Retention time for NAT hole punching strategy data.
+natholeAnalysisDataReserveHours = 168
+
+[[httpPlugins]]
+name = "user-manager"
+addr = "127.0.0.1:9000"
+path = "/handler"
+ops = ["Login"]
+
+[[httpPlugins]]
+name = "port-manager"
+addr = "127.0.0.1:9001"
+path = "/handler"
+ops = ["NewProxy"]
diff --git a/apps/frps/0.52.1/docker-compose.yml b/apps/frps/0.52.1/docker-compose.yml
index 9c89ff69..b8bdbf78 100644
--- a/apps/frps/0.52.1/docker-compose.yml
+++ b/apps/frps/0.52.1/docker-compose.yml
@@ -5,7 +5,7 @@ services:
     restart: always
     network_mode: "host"
     volumes:
-        - "./data/frps.ini:/etc/frp/frps.ini"
+        - "./data/frps.toml:/etc/frp/frps.toml"
     image: "snowdreamtech/frps:0.52.1"
     labels:  
       createdBy: "Apps"